Contract Source Code (Solidity)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Is this a proxy?
• Similar
• Submit Audit
• Compare

/**
 *Submitted for verification at KatanaScan.com on 2025-07-25
*/

// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.5.0 >=0.6.12 >=0.8.18 ^0.8.0 ^0.8.1 ^0.8.18;
pragma experimental ABIEncoderV2;

// lib/openzeppelin-contracts/contracts/utils/Address.sol

// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// lib/openzeppelin-contracts/contracts/utils/Context.sol

// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// lib/tokenized-strategy/src/interfaces/IBaseStrategy.sol

interface IBaseStrategy {
    function tokenizedStrategyAddress() external view returns (address);

    /*//////////////////////////////////////////////////////////////
                            IMMUTABLE FUNCTIONS
    //////////////////////////////////////////////////////////////*/

    function availableDepositLimit(
        address _owner
    ) external view returns (uint256);

    function availableWithdrawLimit(
        address _owner
    ) external view returns (uint256);

    function deployFunds(uint256 _assets) external;

    function freeFunds(uint256 _amount) external;

    function harvestAndReport() external returns (uint256);

    function tendThis(uint256 _totalIdle) external;

    function shutdownWithdraw(uint256 _amount) external;

    function tendTrigger() external view returns (bool, bytes memory);
}

// lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol

// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Permit.sol

// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// lib/tokenized-strategy-periphery/src/interfaces/Uniswap/V3/IUniswapV3SwapCallback.sol

/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}

// lib/openzeppelin-contracts/contracts/utils/math/Math.sol

// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// lib/tokenized-strategy-periphery/src/interfaces/Uniswap/V3/ISwapRouter.sol

/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Uniswap V3
interface ISwapRouter is IUniswapV3SwapCallback {
    struct ExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingle(
        ExactInputSingleParams calldata params
    ) external payable returns (uint256 amountOut);

    struct ExactInputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInput(
        ExactInputParams calldata params
    ) external payable returns (uint256 amountOut);

    struct ExactOutputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutputSingle(
        ExactOutputSingleParams calldata params
    ) external payable returns (uint256 amountIn);

    struct ExactOutputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutput(
        ExactOutputParams calldata params
    ) external payable returns (uint256 amountIn);

    // Taken from https://soliditydeveloper.com/uniswap3
    // Manually added to the interface
    function refundETH() external payable;
}

// lib/openzeppelin-contracts/contracts/interfaces/IERC4626.sol

// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC4626.sol)

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 *
 * _Available since v4.7._
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

// lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol

// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol

// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// lib/tokenized-strategy/src/interfaces/ITokenizedStrategy.sol

// Interface that implements the 4626 standard and the implementation functions
interface ITokenizedStrategy is IERC4626, IERC20Permit {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event StrategyShutdown();

    event NewTokenizedStrategy(
        address indexed strategy,
        address indexed asset,
        string apiVersion
    );

    event Reported(
        uint256 profit,
        uint256 loss,
        uint256 protocolFees,
        uint256 performanceFees
    );

    event UpdatePerformanceFeeRecipient(
        address indexed newPerformanceFeeRecipient
    );

    event UpdateKeeper(address indexed newKeeper);

    event UpdatePerformanceFee(uint16 newPerformanceFee);

    event UpdateManagement(address indexed newManagement);

    event UpdateEmergencyAdmin(address indexed newEmergencyAdmin);

    event UpdateProfitMaxUnlockTime(uint256 newProfitMaxUnlockTime);

    event UpdatePendingManagement(address indexed newPendingManagement);

    /*//////////////////////////////////////////////////////////////
                           INITIALIZATION
    //////////////////////////////////////////////////////////////*/

    function initialize(
        address _asset,
        string memory _name,
        address _management,
        address _performanceFeeRecipient,
        address _keeper
    ) external;

    /*//////////////////////////////////////////////////////////////
                    NON-STANDARD 4626 OPTIONS
    //////////////////////////////////////////////////////////////*/

    function withdraw(
        uint256 assets,
        address receiver,
        address owner,
        uint256 maxLoss
    ) external returns (uint256);

    function redeem(
        uint256 shares,
        address receiver,
        address owner,
        uint256 maxLoss
    ) external returns (uint256);

    function maxWithdraw(
        address owner,
        uint256 /*maxLoss*/
    ) external view returns (uint256);

    function maxRedeem(
        address owner,
        uint256 /*maxLoss*/
    ) external view returns (uint256);

    /*//////////////////////////////////////////////////////////////
                        MODIFIER HELPERS
    //////////////////////////////////////////////////////////////*/

    function requireManagement(address _sender) external view;

    function requireKeeperOrManagement(address _sender) external view;

    function requireEmergencyAuthorized(address _sender) external view;

    /*//////////////////////////////////////////////////////////////
                        KEEPERS FUNCTIONS
    //////////////////////////////////////////////////////////////*/

    function tend() external;

    function report() external returns (uint256 _profit, uint256 _loss);

    /*//////////////////////////////////////////////////////////////
                        CONSTANTS
    //////////////////////////////////////////////////////////////*/

    function MAX_FEE() external view returns (uint16);

    function FACTORY() external view returns (address);

    /*//////////////////////////////////////////////////////////////
                            GETTERS
    //////////////////////////////////////////////////////////////*/

    function apiVersion() external view returns (string memory);

    function pricePerShare() external view returns (uint256);

    function management() external view returns (address);

    function pendingManagement() external view returns (address);

    function keeper() external view returns (address);

    function emergencyAdmin() external view returns (address);

    function performanceFee() external view returns (uint16);

    function performanceFeeRecipient() external view returns (address);

    function fullProfitUnlockDate() external view returns (uint256);

    function profitUnlockingRate() external view returns (uint256);

    function profitMaxUnlockTime() external view returns (uint256);

    function lastReport() external view returns (uint256);

    function isShutdown() external view returns (bool);

    function unlockedShares() external view returns (uint256);

    /*//////////////////////////////////////////////////////////////
                            SETTERS
    //////////////////////////////////////////////////////////////*/

    function setPendingManagement(address) external;

    function acceptManagement() external;

    function setKeeper(address _keeper) external;

    function setEmergencyAdmin(address _emergencyAdmin) external;

    function setPerformanceFee(uint16 _performanceFee) external;

    function setPerformanceFeeRecipient(
        address _performanceFeeRecipient
    ) external;

    function setProfitMaxUnlockTime(uint256 _profitMaxUnlockTime) external;

    function setName(string calldata _newName) external;

    function shutdownStrategy() external;

    function emergencyWithdraw(uint256 _amount) external;
}

// lib/tokenized-strategy/src/BaseStrategy.sol

// TokenizedStrategy interface used for internal view delegateCalls.

/**
 * @title YearnV3 Base Strategy
 * @author yearn.finance
 * @notice
 *  BaseStrategy implements all of the required functionality to
 *  seamlessly integrate with the `TokenizedStrategy` implementation contract
 *  allowing anyone to easily build a fully permissionless ERC-4626 compliant
 *  Vault by inheriting this contract and overriding three simple functions.

 *  It utilizes an immutable proxy pattern that allows the BaseStrategy
 *  to remain simple and small. All standard logic is held within the
 *  `TokenizedStrategy` and is reused over any n strategies all using the
 *  `fallback` function to delegatecall the implementation so that strategists
 *  can only be concerned with writing their strategy specific code.
 *
 *  This contract should be inherited and the three main abstract methods
 *  `_deployFunds`, `_freeFunds` and `_harvestAndReport` implemented to adapt
 *  the Strategy to the particular needs it has to generate yield. There are
 *  other optional methods that can be implemented to further customize
 *  the strategy if desired.
 *
 *  All default storage for the strategy is controlled and updated by the
 *  `TokenizedStrategy`. The implementation holds a storage struct that
 *  contains all needed global variables in a manual storage slot. This
 *  means strategists can feel free to implement their own custom storage
 *  variables as they need with no concern of collisions. All global variables
 *  can be viewed within the Strategy by a simple call using the
 *  `TokenizedStrategy` variable. IE: TokenizedStrategy.globalVariable();.
 */
abstract contract BaseStrategy {
    /*//////////////////////////////////////////////////////////////
                            MODIFIERS
    //////////////////////////////////////////////////////////////*/
    /**
     * @dev Used on TokenizedStrategy callback functions to make sure it is post
     * a delegateCall from this address to the TokenizedStrategy.
     */
    modifier onlySelf() {
        _onlySelf();
        _;
    }

    /**
     * @dev Use to assure that the call is coming from the strategies management.
     */
    modifier onlyManagement() {
        TokenizedStrategy.requireManagement(msg.sender);
        _;
    }

    /**
     * @dev Use to assure that the call is coming from either the strategies
     * management or the keeper.
     */
    modifier onlyKeepers() {
        TokenizedStrategy.requireKeeperOrManagement(msg.sender);
        _;
    }

    /**
     * @dev Use to assure that the call is coming from either the strategies
     * management or the emergency admin.
     */
    modifier onlyEmergencyAuthorized() {
        TokenizedStrategy.requireEmergencyAuthorized(msg.sender);
        _;
    }

    /**
     * @dev Require that the msg.sender is this address.
     */
    function _onlySelf() internal view {
        require(msg.sender == address(this), "!self");
    }

    /*//////////////////////////////////////////////////////////////
                            CONSTANTS
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev This is the address of the TokenizedStrategy implementation
     * contract that will be used by all strategies to handle the
     * accounting, logic, storage etc.
     *
     * Any external calls to the that don't hit one of the functions
     * defined in this base or the strategy will end up being forwarded
     * through the fallback function, which will delegateCall this address.
     *
     * This address should be the same for every strategy, never be adjusted
     * and always be checked before any integration with the Strategy.
     */
    address public constant tokenizedStrategyAddress =
        0xD377919FA87120584B21279a491F82D5265A139c;

    /*//////////////////////////////////////////////////////////////
                            IMMUTABLES
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Underlying asset the Strategy is earning yield on.
     * Stored here for cheap retrievals within the strategy.
     */
    ERC20 internal immutable asset;

    /**
     * @dev This variable is set to address(this) during initialization of each strategy.
     *
     * This can be used to retrieve storage data within the strategy
     * contract as if it were a linked library.
     *
     *       i.e. uint256 totalAssets = TokenizedStrategy.totalAssets()
     *
     * Using address(this) will mean any calls using this variable will lead
     * to a call to itself. Which will hit the fallback function and
     * delegateCall that to the actual TokenizedStrategy.
     */
    ITokenizedStrategy internal immutable TokenizedStrategy;

    /**
     * @notice Used to initialize the strategy on deployment.
     *
     * This will set the `TokenizedStrategy` variable for easy
     * internal view calls to the implementation. As well as
     * initializing the default storage variables based on the
     * parameters and using the deployer for the permissioned roles.
     *
     * @param _asset Address of the underlying asset.
     * @param _name Name the strategy will use.
     */
    constructor(address _asset, string memory _name) {
        asset = ERC20(_asset);

        // Set instance of the implementation for internal use.
        TokenizedStrategy = ITokenizedStrategy(address(this));

        // Initialize the strategy's storage variables.
        _delegateCall(
            abi.encodeCall(
                ITokenizedStrategy.initialize,
                (_asset, _name, msg.sender, msg.sender, msg.sender)
            )
        );

        // Store the tokenizedStrategyAddress at the standard implementation
        // address storage slot so etherscan picks up the interface. This gets
        // stored on initialization and never updated.
        assembly {
            sstore(
                // keccak256('eip1967.proxy.implementation' - 1)
                0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc,
                tokenizedStrategyAddress
            )
        }
    }

    /*//////////////////////////////////////////////////////////////
                NEEDED TO BE OVERRIDDEN BY STRATEGIST
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Can deploy up to '_amount' of 'asset' in the yield source.
     *
     * This function is called at the end of a {deposit} or {mint}
     * call. Meaning that unless a whitelist is implemented it will
     * be entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * @param _amount The amount of 'asset' that the strategy can attempt
     * to deposit in the yield source.
     */
    function _deployFunds(uint256 _amount) internal virtual;

    /**
     * @dev Should attempt to free the '_amount' of 'asset'.
     *
     * NOTE: The amount of 'asset' that is already loose has already
     * been accounted for.
     *
     * This function is called during {withdraw} and {redeem} calls.
     * Meaning that unless a whitelist is implemented it will be
     * entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * Should not rely on asset.balanceOf(address(this)) calls other than
     * for diff accounting purposes.
     *
     * Any difference between `_amount` and what is actually freed will be
     * counted as a loss and passed on to the withdrawer. This means
     * care should be taken in times of illiquidity. It may be better to revert
     * if withdraws are simply illiquid so not to realize incorrect losses.
     *
     * @param _amount, The amount of 'asset' to be freed.
     */
    function _freeFunds(uint256 _amount) internal virtual;

    /**
     * @dev Internal function to harvest all rewards, redeploy any idle
     * funds and return an accurate accounting of all funds currently
     * held by the Strategy.
     *
     * This should do any needed harvesting, rewards selling, accrual,
     * redepositing etc. to get the most accurate view of current assets.
     *
     * NOTE: All applicable assets including loose assets should be
     * accounted for in this function.
     *
     * Care should be taken when relying on oracles or swap values rather
     * than actual amounts as all Strategy profit/loss accounting will
     * be done based on this returned value.
     *
     * This can still be called post a shutdown, a strategist can check
     * `TokenizedStrategy.isShutdown()` to decide if funds should be
     * redeployed or simply realize any profits/losses.
     *
     * @return _totalAssets A trusted and accurate account for the total
     * amount of 'asset' the strategy currently holds including idle funds.
     */
    function _harvestAndReport()
        internal
        virtual
        returns (uint256 _totalAssets);

    /*//////////////////////////////////////////////////////////////
                    OPTIONAL TO OVERRIDE BY STRATEGIST
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Optional function for strategist to override that can
     *  be called in between reports.
     *
     * If '_tend' is used tendTrigger() will also need to be overridden.
     *
     * This call can only be called by a permissioned role so may be
     * through protected relays.
     *
     * This can be used to harvest and compound rewards, deposit idle funds,
     * perform needed position maintenance or anything else that doesn't need
     * a full report for.
     *
     *   EX: A strategy that can not deposit funds without getting
     *       sandwiched can use the tend when a certain threshold
     *       of idle to totalAssets has been reached.
     *
     * This will have no effect on PPS of the strategy till report() is called.
     *
     * @param _totalIdle The current amount of idle funds that are available to deploy.
     */
    function _tend(uint256 _totalIdle) internal virtual {}

    /**
     * @dev Optional trigger to override if tend() will be used by the strategy.
     * This must be implemented if the strategy hopes to invoke _tend().
     *
     * @return . Should return true if tend() should be called by keeper or false if not.
     */
    function _tendTrigger() internal view virtual returns (bool) {
        return false;
    }

    /**
     * @notice Returns if tend() should be called by a keeper.
     *
     * @return . Should return true if tend() should be called by keeper or false if not.
     * @return . Calldata for the tend call.
     */
    function tendTrigger() external view virtual returns (bool, bytes memory) {
        return (
            // Return the status of the tend trigger.
            _tendTrigger(),
            // And the needed calldata either way.
            abi.encodeWithSelector(ITokenizedStrategy.tend.selector)
        );
    }

    /**
     * @notice Gets the max amount of `asset` that an address can deposit.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any deposit or mints to enforce
     * any limits desired by the strategist. This can be used for either a
     * traditional deposit limit or for implementing a whitelist etc.
     *
     *   EX:
     *      if(isAllowed[_owner]) return super.availableDepositLimit(_owner);
     *
     * This does not need to take into account any conversion rates
     * from shares to assets. But should know that any non max uint256
     * amounts may be converted to shares. So it is recommended to keep
     * custom amounts low enough as not to cause overflow when multiplied
     * by `totalSupply`.
     *
     * @param . The address that is depositing into the strategy.
     * @return . The available amount the `_owner` can deposit in terms of `asset`
     */
    function availableDepositLimit(
        address /*_owner*/
    ) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /**
     * @notice Gets the max amount of `asset` that can be withdrawn.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any withdraw or redeem to enforce
     * any limits desired by the strategist. This can be used for illiquid
     * or sandwichable strategies. It should never be lower than `totalIdle`.
     *
     *   EX:
     *       return TokenIzedStrategy.totalIdle();
     *
     * This does not need to take into account the `_owner`'s share balance
     * or conversion rates from shares to assets.
     *
     * @param . The address that is withdrawing from the strategy.
     * @return . The available amount that can be withdrawn in terms of `asset`
     */
    function availableWithdrawLimit(
        address /*_owner*/
    ) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /**
     * @dev Optional function for a strategist to override that will
     * allow management to manually withdraw deployed funds from the
     * yield source if a strategy is shutdown.
     *
     * This should attempt to free `_amount`, noting that `_amount` may
     * be more than is currently deployed.
     *
     * NOTE: This will not realize any profits or losses. A separate
     * {report} will be needed in order to record any profit/loss. If
     * a report may need to be called after a shutdown it is important
     * to check if the strategy is shutdown during {_harvestAndReport}
     * so that it does not simply re-deploy all funds that had been freed.
     *
     * EX:
     *   if(freeAsset > 0 && !TokenizedStrategy.isShutdown()) {
     *       depositFunds...
     *    }
     *
     * @param _amount The amount of asset to attempt to free.
     */
    function _emergencyWithdraw(uint256 _amount) internal virtual {}

    /*//////////////////////////////////////////////////////////////
                        TokenizedStrategy HOOKS
    //////////////////////////////////////////////////////////////*/

    /**
     * @notice Can deploy up to '_amount' of 'asset' in yield source.
     * @dev Callback for the TokenizedStrategy to call during a {deposit}
     * or {mint} to tell the strategy it can deploy funds.
     *
     * Since this can only be called after a {deposit} or {mint}
     * delegateCall to the TokenizedStrategy msg.sender == address(this).
     *
     * Unless a whitelist is implemented this will be entirely permissionless
     * and thus can be sandwiched or otherwise manipulated.
     *
     * @param _amount The amount of 'asset' that the strategy can
     * attempt to deposit in the yield source.
     */
    function deployFunds(uint256 _amount) external virtual onlySelf {
        _deployFunds(_amount);
    }

    /**
     * @notice Should attempt to free the '_amount' of 'asset'.
     * @dev Callback for the TokenizedStrategy to call during a withdraw
     * or redeem to free the needed funds to service the withdraw.
     *
     * This can only be called after a 'withdraw' or 'redeem' delegateCall
     * to the TokenizedStrategy so msg.sender == address(this).
     *
     * @param _amount The amount of 'asset' that the strategy should attempt to free up.
     */
    function freeFunds(uint256 _amount) external virtual onlySelf {
        _freeFunds(_amount);
    }

    /**
     * @notice Returns the accurate amount of all funds currently
     * held by the Strategy.
     * @dev Callback for the TokenizedStrategy to call during a report to
     * get an accurate accounting of assets the strategy controls.
     *
     * This can only be called after a report() delegateCall to the
     * TokenizedStrategy so msg.sender == address(this).
     *
     * @return . A trusted and accurate account for the total amount
     * of 'asset' the strategy currently holds including idle funds.
     */
    function harvestAndReport() external virtual onlySelf returns (uint256) {
        return _harvestAndReport();
    }

    /**
     * @notice Will call the internal '_tend' when a keeper tends the strategy.
     * @dev Callback for the TokenizedStrategy to initiate a _tend call in the strategy.
     *
     * This can only be called after a tend() delegateCall to the TokenizedStrategy
     * so msg.sender == address(this).
     *
     * We name the function `tendThis` so that `tend` calls are forwarded to
     * the TokenizedStrategy.

     * @param _totalIdle The amount of current idle funds that can be
     * deployed during the tend
     */
    function tendThis(uint256 _totalIdle) external virtual onlySelf {
        _tend(_totalIdle);
    }

    /**
     * @notice Will call the internal '_emergencyWithdraw' function.
     * @dev Callback for the TokenizedStrategy during an emergency withdraw.
     *
     * This can only be called after a emergencyWithdraw() delegateCall to
     * the TokenizedStrategy so msg.sender == address(this).
     *
     * We name the function `shutdownWithdraw` so that `emergencyWithdraw`
     * calls are forwarded to the TokenizedStrategy.
     *
     * @param _amount The amount of asset to attempt to free.
     */
    function shutdownWithdraw(uint256 _amount) external virtual onlySelf {
        _emergencyWithdraw(_amount);
    }

    /**
     * @dev Function used to delegate call the TokenizedStrategy with
     * certain `_calldata` and return any return values.
     *
     * This is used to setup the initial storage of the strategy, and
     * can be used by strategist to forward any other call to the
     * TokenizedStrategy implementation.
     *
     * @param _calldata The abi encoded calldata to use in delegatecall.
     * @return . The return value if the call was successful in bytes.
     */
    function _delegateCall(
        bytes memory _calldata
    ) internal returns (bytes memory) {
        // Delegate call the tokenized strategy with provided calldata.
        (bool success, bytes memory result) = tokenizedStrategyAddress
            .delegatecall(_calldata);

        // If the call reverted. Return the error.
        if (!success) {
            assembly {
                let ptr := mload(0x40)
                let size := returndatasize()
                returndatacopy(ptr, 0, size)
                revert(ptr, size)
            }
        }

        // Return the result.
        return result;
    }

    /**
     * @dev Execute a function on the TokenizedStrategy and return any value.
     *
     * This fallback function will be executed when any of the standard functions
     * defined in the TokenizedStrategy are called since they wont be defined in
     * this contract.
     *
     * It will delegatecall the TokenizedStrategy implementation with the exact
     * calldata and return any relevant values.
     *
     */
    fallback() external {
        // load our target address
        address _tokenizedStrategyAddress = tokenizedStrategyAddress;
        // Execute external function using delegatecall and return any value.
        assembly {
            // Copy function selector and any arguments.
            calldatacopy(0, 0, calldatasize())
            // Execute function delegatecall.
            let result := delegatecall(
                gas(),
                _tokenizedStrategyAddress,
                0,
                calldatasize(),
                0,
                0
            )
            // Get any return value
            returndatacopy(0, 0, returndatasize())
            // Return any return value or error back to the caller
            switch result
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
}

// lib/tokenized-strategy-periphery/src/Bases/HealthCheck/BaseHealthCheck.sol

/**
 *   @title Base Health Check
 *   @author Yearn.finance
 *   @notice This contract can be inherited by any Yearn
 *   V3 strategy wishing to implement a health check during
 *   the `report` function in order to prevent any unexpected
 *   behavior from being permanently recorded as well as the
 *   `checkHealth` modifier.
 *
 *   A strategist simply needs to inherit this contract. Set
 *   the limit ratios to the desired amounts and then
 *   override `_harvestAndReport()` just as they otherwise
 *  would. If the profit or loss that would be recorded is
 *   outside the acceptable bounds the tx will revert.
 *
 *   The healthcheck does not prevent a strategy from reporting
 *   losses, but rather can make sure manual intervention is
 *   needed before reporting an unexpected loss or profit.
 */
abstract contract BaseHealthCheck is BaseStrategy {
    // Can be used to determine if a healthcheck should be called.
    // Defaults to true;
    bool public doHealthCheck = true;

    uint256 internal constant MAX_BPS = 10_000;

    // Default profit limit to 100%.
    uint16 private _profitLimitRatio = uint16(MAX_BPS);

    // Defaults loss limit to 0.
    uint16 private _lossLimitRatio;

    constructor(
        address _asset,
        string memory _name
    ) BaseStrategy(_asset, _name) {}

    /**
     * @notice Returns the current profit limit ratio.
     * @dev Use a getter function to keep the variable private.
     * @return . The current profit limit ratio.
     */
    function profitLimitRatio() public view returns (uint256) {
        return _profitLimitRatio;
    }

    /**
     * @notice Returns the current loss limit ratio.
     * @dev Use a getter function to keep the variable private.
     * @return . The current loss limit ratio.
     */
    function lossLimitRatio() public view returns (uint256) {
        return _lossLimitRatio;
    }

    /**
     * @notice Set the `profitLimitRatio`.
     * @dev Denominated in basis points. I.E. 1_000 == 10%.
     * @param _newProfitLimitRatio The mew profit limit ratio.
     */
    function setProfitLimitRatio(
        uint256 _newProfitLimitRatio
    ) external onlyManagement {
        _setProfitLimitRatio(_newProfitLimitRatio);
    }

    /**
     * @dev Internally set the profit limit ratio. Denominated
     * in basis points. I.E. 1_000 == 10%.
     * @param _newProfitLimitRatio The mew profit limit ratio.
     */
    function _setProfitLimitRatio(uint256 _newProfitLimitRatio) internal {
        require(_newProfitLimitRatio > 0, "!zero profit");
        require(_newProfitLimitRatio <= type(uint16).max, "!too high");
        _profitLimitRatio = uint16(_newProfitLimitRatio);
    }

    /**
     * @notice Set the `lossLimitRatio`.
     * @dev Denominated in basis points. I.E. 1_000 == 10%.
     * @param _newLossLimitRatio The new loss limit ratio.
     */
    function setLossLimitRatio(
        uint256 _newLossLimitRatio
    ) external onlyManagement {
        _setLossLimitRatio(_newLossLimitRatio);
    }

    /**
     * @dev Internally set the loss limit ratio. Denominated
     * in basis points. I.E. 1_000 == 10%.
     * @param _newLossLimitRatio The new loss limit ratio.
     */
    function _setLossLimitRatio(uint256 _newLossLimitRatio) internal {
        require(_newLossLimitRatio < MAX_BPS, "!loss limit");
        _lossLimitRatio = uint16(_newLossLimitRatio);
    }

    /**
     * @notice Turns the healthcheck on and off.
     * @dev If turned off the next report will auto turn it back on.
     * @param _doHealthCheck Bool if healthCheck should be done.
     */
    function setDoHealthCheck(bool _doHealthCheck) public onlyManagement {
        doHealthCheck = _doHealthCheck;
    }

    /**
     * @notice OVerrides the default {harvestAndReport} to include a healthcheck.
     * @return _totalAssets New totalAssets post report.
     */
    function harvestAndReport()
        external
        override
        onlySelf
        returns (uint256 _totalAssets)
    {
        // Let the strategy report.
        _totalAssets = _harvestAndReport();

        // Run the healthcheck on the amount returned.
        _executeHealthCheck(_totalAssets);
    }

    /**
     * @dev To be called during a report to make sure the profit
     * or loss being recorded is within the acceptable bound.
     *
     * @param _newTotalAssets The amount that will be reported.
     */
    function _executeHealthCheck(uint256 _newTotalAssets) internal virtual {
        if (!doHealthCheck) {
            doHealthCheck = true;
            return;
        }

        // Get the current total assets from the implementation.
        uint256 currentTotalAssets = TokenizedStrategy.totalAssets();

        if (_newTotalAssets > currentTotalAssets) {
            require(
                ((_newTotalAssets - currentTotalAssets) <=
                    (currentTotalAssets * uint256(_profitLimitRatio)) /
                        MAX_BPS),
                "healthCheck"
            );
        } else if (currentTotalAssets > _newTotalAssets) {
            require(
                (currentTotalAssets - _newTotalAssets <=
                    ((currentTotalAssets * uint256(_lossLimitRatio)) /
                        MAX_BPS)),
                "healthCheck"
            );
        }
    }
}

// lib/tokenized-strategy/src/interfaces/IStrategy.sol

interface IStrategy is IBaseStrategy, ITokenizedStrategy {}

// lib/tokenized-strategy-periphery/src/swappers/UniswapV3Swapper.sol

/**
 *   @title UniswapV3Swapper
 *   @author Yearn.finance
 *   @dev This is a simple contract that can be inherited by any tokenized
 *   strategy that would like to use Uniswap V3 for swaps. It hold all needed
 *   logic to perform both exact input and exact output swaps.
 *
 *   The global address variables default to the ETH mainnet addresses but
 *   remain settable by the inheriting contract to allow for customization
 *   based on needs or chain its used on.
 *
 *   The only variables that are required to be set are the specific fees
 *   for each token pair. The inheriting contract can use the {_setUniFees}
 *   function to easily set this for any token pairs needed.
 */
contract UniswapV3Swapper {
    using SafeERC20 for ERC20;

    // Optional Variable to be set to not sell dust.
    uint256 public minAmountToSell;
    // Defaults to WETH on mainnet.
    address public base = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;

    // Defaults to Uniswap V3 router on mainnet.
    address public router = 0xE592427A0AEce92De3Edee1F18E0157C05861564;

    // Fees for the Uni V3 pools. Each fee should get set each way in
    // the mapping so no matter the direction the correct fee will get
    // returned for any two tokens.
    mapping(address => mapping(address => uint24)) public uniFees;

    /**
     * @dev All fess will default to 0 on creation. A strategist will need
     * To set the mapping for the tokens expected to swap. This function
     * is to help set the mapping. It can be called internally during
     * initialization, through permissioned functions etc.
     */
    function _setUniFees(
        address _token0,
        address _token1,
        uint24 _fee
    ) internal virtual {
        uniFees[_token0][_token1] = _fee;
        uniFees[_token1][_token0] = _fee;
    }

    /**
     * @dev Used to swap a specific amount of `_from` to `_to`.
     * This will check and handle all allowances as well as not swapping
     * unless `_amountIn` is greater than the set `_minAmountOut`
     *
     * If one of the tokens matches with the `base` token it will do only
     * one jump, otherwise will do two jumps.
     *
     * The corresponding uniFees for each token pair will need to be set
     * other wise this function will revert.
     *
     * @param _from The token we are swapping from.
     * @param _to The token we are swapping to.
     * @param _amountIn The amount of `_from` we will swap.
     * @param _minAmountOut The min of `_to` to get out.
     * @return _amountOut The actual amount of `_to` that was swapped to
     */
    function _swapFrom(
        address _from,
        address _to,
        uint256 _amountIn,
        uint256 _minAmountOut
    ) internal virtual returns (uint256 _amountOut) {
        if (_amountIn > minAmountToSell) {
            _checkAllowance(router, _from, _amountIn);
            if (_from == base || _to == base) {
                ISwapRouter.ExactInputSingleParams memory params = ISwapRouter
                    .ExactInputSingleParams(
                        _from, // tokenIn
                        _to, // tokenOut
                        uniFees[_from][_to], // from-to fee
                        address(this), // recipient
                        block.timestamp, // deadline
                        _amountIn, // amountIn
                        _minAmountOut, // amountOut
                        0 // sqrtPriceLimitX96
                    );

                _amountOut = ISwapRouter(router).exactInputSingle(params);
            } else {
                bytes memory path = abi.encodePacked(
                    _from, // tokenIn
                    uniFees[_from][base], // from-base fee
                    base, // base token
                    uniFees[base][_to], // base-to fee
                    _to // tokenOut
                );

                _amountOut = ISwapRouter(router).exactInput(
                    ISwapRouter.ExactInputParams(
                        path,
                        address(this),
                        block.timestamp,
                        _amountIn,
                        _minAmountOut
                    )
                );
            }
        }
    }

    /**
     * @dev Used to swap a specific amount of `_to` from `_from` unless
     * it takes more than `_maxAmountFrom`.
     *
     * This will check and handle all allowances as well as not swapping
     * unless `_maxAmountFrom` is greater than the set `minAmountToSell`
     *
     * If one of the tokens matches with the `base` token it will do only
     * one jump, otherwise will do two jumps.
     *
     * The corresponding uniFees for each token pair will need to be set
     * other wise this function will revert.
     *
     * @param _from The token we are swapping from.
     * @param _to The token we are swapping to.
     * @param _amountTo The amount of `_to` we need out.
     * @param _maxAmountFrom The max of `_from` we will swap.
     * @return _amountIn The actual amount of `_from` swapped.
     */
    function _swapTo(
        address _from,
        address _to,
        uint256 _amountTo,
        uint256 _maxAmountFrom
    ) internal virtual returns (uint256 _amountIn) {
        if (_maxAmountFrom > minAmountToSell) {
            _checkAllowance(router, _from, _maxAmountFrom);
            if (_from == base || _to == base) {
                ISwapRouter.ExactOutputSingleParams memory params = ISwapRouter
                    .ExactOutputSingleParams(
                        _from, // tokenIn
                        _to, // tokenOut
                        uniFees[_from][_to], // from-to fee
                        address(this), // recipient
                        block.timestamp, // deadline
                        _amountTo, // amountOut
                        _maxAmountFrom, // maxAmountIn
                        0 // sqrtPriceLimitX96
                    );

                _amountIn = ISwapRouter(router).exactOutputSingle(params);
            } else {
                bytes memory path = abi.encodePacked(
                    _to,
                    uniFees[base][_to], // base-to fee
                    base,
                    uniFees[_from][base], // from-base fee
                    _from
                );

                _amountIn = ISwapRouter(router).exactOutput(
                    ISwapRouter.ExactOutputParams(
                        path,
                        address(this),
                        block.timestamp,
                        _amountTo, // How much we want out
                        _maxAmountFrom
                    )
                );
            }
        }
    }

    /**
     * @dev Internal safe function to make sure the contract you want to
     * interact with has enough allowance to pull the desired tokens.
     *
     * @param _contract The address of the contract that will move the token.
     * @param _token The ERC-20 token that will be getting spent.
     * @param _amount The amount of `_token` to be spent.
     */
    function _checkAllowance(
        address _contract,
        address _token,
        uint256 _amount
    ) internal virtual {
        if (ERC20(_token).allowance(address(this), _contract) < _amount) {
            ERC20(_token).safeApprove(_contract, 0);
            ERC20(_token).safeApprove(_contract, _amount);
        }
    }
}

// lib/tokenized-strategy-periphery/src/Bases/4626Compounder/Base4626Compounder.sol

// We use the Tokenized Strategy interface.

/**
 * @title Base4626Compounder
 * @dev Can be used to make a simple strategy that compounds
 *   rewards for any 4626 vault.
 */
contract Base4626Compounder is BaseHealthCheck {
    using SafeERC20 for ERC20;

    IStrategy public immutable vault;

    constructor(
        address _asset,
        string memory _name,
        address _vault
    ) BaseHealthCheck(_asset, _name) {
        require(IStrategy(_vault).asset() == _asset, "wrong vault");
        vault = IStrategy(_vault);

        asset.safeApprove(_vault, type(uint256).max);
    }

    /*//////////////////////////////////////////////////////////////
                NEEDED TO BE OVERRIDDEN BY STRATEGIST
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Should deploy up to '_amount' of 'asset' in the yield source.
     *
     * This function is called at the end of a {deposit} or {mint}
     * call. Meaning that unless a whitelist is implemented it will
     * be entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * @param _amount The amount of 'asset' that the strategy should attempt
     * to deposit in the yield source.
     */
    function _deployFunds(uint256 _amount) internal virtual override {
        vault.deposit(_amount, address(this));
        _stake();
    }

    /**
     * @dev Will attempt to free the '_amount' of 'asset'.
     *
     * The amount of 'asset' that is already loose has already
     * been accounted for.
     *
     * This function is called during {withdraw} and {redeem} calls.
     * Meaning that unless a whitelist is implemented it will be
     * entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * Should not rely on asset.balanceOf(address(this)) calls other than
     * for diff accounting purposes.
     *
     * Any difference between `_amount` and what is actually freed will be
     * counted as a loss and passed on to the withdrawer. This means
     * care should be taken in times of illiquidity. It may be better to revert
     * if withdraws are simply illiquid so not to realize incorrect losses.
     *
     * @param _amount, The amount of 'asset' to be freed.
     */
    function _freeFunds(uint256 _amount) internal virtual override {
        // Use previewWithdraw to round up.
        uint256 shares = vault.previewWithdraw(_amount);

        uint256 vaultBalance = balanceOfVault();
        if (shares > vaultBalance) {
            unchecked {
                _unStake(shares - vaultBalance);
            }
            shares = Math.min(shares, balanceOfVault());
        }

        vault.redeem(shares, address(this), address(this));
    }

    /**
     * @dev Internal function to harvest all rewards, redeploy any idle
     * funds and return an accurate accounting of all funds currently
     * held by the Strategy.
     *
     * This should do any needed harvesting, rewards selling, accrual,
     * redepositing etc. to get the most accurate view of current assets.
     *
     * NOTE: All applicable assets including loose assets should be
     * accounted for in this function.
     *
     * Care should be taken when relying on oracles or swap values rather
     * than actual amounts as all Strategy profit/loss accounting will
     * be done based on this returned value.
     *
     * This can still be called post a shutdown, a strategist can check
     * `TokenizedStrategy.isShutdown()` to decide if funds should be
     * redeployed or simply realize any profits/losses.
     *
     * @return _totalAssets A trusted and accurate account for the total
     * amount of 'asset' the strategy currently holds including idle funds.
     */
    function _harvestAndReport()
        internal
        virtual
        override
        returns (uint256 _totalAssets)
    {
        // Claim and sell any rewards.
        _claimAndSellRewards();

        // Return total balance
        _totalAssets = balanceOfAsset() + valueOfVault();
    }

    /**
     * @dev Override to stake loose vault tokens after they
     *   are deposited to the `vault`.
     */
    function _stake() internal virtual {}

    /**
     * @dev If vault tokens are staked, override to unstake them before
     *   any withdraw or redeems.
     * @param _amount The amount of vault tokens to unstake.
     */
    function _unStake(uint256 _amount) internal virtual {}

    /**
     * @dev Called during reports to do any harvesting of rewards needed.
     */
    function _claimAndSellRewards() internal virtual {}

    /**
     * @notice Return the current loose balance of this strategies `asset`.
     */
    function balanceOfAsset() public view virtual returns (uint256) {
        return asset.balanceOf(address(this));
    }

    /**
     * @notice Return the current balance of the strategies vault shares.
     */
    function balanceOfVault() public view virtual returns (uint256) {
        return vault.balanceOf(address(this));
    }

    /**
     * @notice If the vaults tokens are staked. To override and return the
     *  amount of vault tokens the strategy has staked.
     */
    function balanceOfStake() public view virtual returns (uint256) {}

    /**
     * @notice The full value denominated in `asset` of the strategies vault
     *   tokens held both in the contract and staked.
     */
    function valueOfVault() public view virtual returns (uint256) {
        return vault.convertToAssets(balanceOfVault() + balanceOfStake());
    }

    /**
     * @notice The max amount of `asset` than can be redeemed from the vault.
     * @dev If the vault tokens are staked this needs to include the
     *  vault.maxRedeem(stakingContract) to be accurate.
     *
     *  NOTE: This should use vault.convertToAssets(vault.maxRedeem(address));
     *    rather than vault.maxWithdraw(address);
     */
    function vaultsMaxWithdraw() public view virtual returns (uint256) {
        return vault.convertToAssets(vault.maxRedeem(address(this)));
    }

    /**
     * @notice Gets the max amount of `asset` that an address can deposit.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any deposit or mints to enforce
     * any limits desired by the strategist. This can be used for either a
     * traditional deposit limit or for implementing a whitelist etc.
     *
     *   EX:
     *      if(isAllowed[_owner]) return super.availableDepositLimit(_owner);
     *
     * This does not need to take into account any conversion rates
     * from shares to assets. But should know that any non max uint256
     * amounts may be converted to shares. So it is recommended to keep
     * custom amounts low enough as not to cause overflow when multiplied
     * by `totalSupply`.
     *
     * @param . The address that is depositing into the strategy.
     * @return . The available amount the `_owner` can deposit in terms of `asset`
     */
    function availableDepositLimit(
        address
    ) public view virtual override returns (uint256) {
        // Return the max amount the vault will allow for deposits.
        return vault.maxDeposit(address(this));
    }

    /**
     * @notice Gets the max amount of `asset` that can be withdrawn.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any withdraw or redeem to enforce
     * any limits desired by the strategist. This can be used for illiquid
     * or sandwichable strategies. It should never be lower than `totalIdle`.
     *
     *   EX:
     *       return TokenIzedStrategy.totalIdle();
     *
     * This does not need to take into account the `_owner`'s share balance
     * or conversion rates from shares to assets.
     *
     * @param . The address that is withdrawing from the strategy.
     * @return . The available amount that can be withdrawn in terms of `asset`
     */
    function availableWithdrawLimit(
        address
    ) public view virtual override returns (uint256) {
        // Return the loose balance of asset and the max we can withdraw from the vault
        return balanceOfAsset() + vaultsMaxWithdraw();
    }

    /**
     * @dev Optional function for a strategist to override that will
     * allow management to manually withdraw deployed funds from the
     * yield source if a strategy is shutdown.
     *
     * This should attempt to free `_amount`, noting that `_amount` may
     * be more than is currently deployed.
     *
     * NOTE: This will not realize any profits or losses. A separate
     * {report} will be needed in order to record any profit/loss. If
     * a report may need to be called after a shutdown it is important
     * to check if the strategy is shutdown during {_harvestAndReport}
     * so that it does not simply re-deploy all funds that had been freed.
     *
     * EX:
     *   if(freeAsset > 0 && !TokenizedStrategy.isShutdown()) {
     *       depositFunds...
     *    }
     *
     * @param _amount The amount of asset to attempt to free.
     */
    function _emergencyWithdraw(uint256 _amount) internal virtual override {
        _freeFunds(Math.min(_amount, vaultsMaxWithdraw()));
    }
}

// src/Strategies/Morpho/Mainnet/MorphoCompounder.sol

interface IAuction {
    function want() external view returns (address);
    function receiver() external view returns (address);
    function kick(address _token) external returns (uint256);
}

contract MorphoCompounder is Base4626Compounder, UniswapV3Swapper {
    using SafeERC20 for ERC20;

    enum SwapType {
        NULL,
        UNISWAP_V3,
        AUCTION
    }

    address public auction;

    // Mapping to be set by management for any reward tokens.
    // This can be used to set different mins for different tokens
    // or to set to uin256.max if selling a reward token is reverting
    mapping(address => uint256) public minAmountToSellMapping;

    mapping(address => SwapType) public swapType;

    address[] public allRewardTokens;

    constructor(
        address _asset,
        string memory _name,
        address _vault
    ) Base4626Compounder(_asset, _name, _vault) {
        router = 0x4e1d81A3E627b9294532e990109e4c21d217376C;
        base = 0xEE7D8BCFb72bC1880D0Cf19822eB0A2e6577aB62;
    }

    function addRewardToken(
        address _token,
        SwapType _swapType
    ) external onlyManagement {
        require(
            _token != address(asset) && _token != address(vault),
            "cannot be a reward token"
        );
        allRewardTokens.push(_token);
        swapType[_token] = _swapType;
    }

    function removeRewardToken(address _token) external onlyManagement {
        address[] memory _allRewardTokens = allRewardTokens;
        uint256 _length = _allRewardTokens.length;

        for (uint256 i = 0; i < _length; i++) {
            if (_allRewardTokens[i] == _token) {
                allRewardTokens[i] = _allRewardTokens[_length - 1];
                allRewardTokens.pop();
            }
        }
        delete swapType[_token];
        delete minAmountToSellMapping[_token];
    }

    function getAllRewardTokens() external view returns (address[] memory) {
        return allRewardTokens;
    }

    function setAuction(address _auction) external onlyManagement {
        if (_auction != address(0)) {
            require(IAuction(_auction).want() == address(asset), "wrong want");
            require(
                IAuction(_auction).receiver() == address(this),
                "wrong receiver"
            );
        }
        auction = _auction;
    }

    function setUniFees(
        address _token0,
        address _token1,
        uint24 _fee
    ) external onlyManagement {
        _setUniFees(_token0, _token1, _fee);
    }

    /**
     * @notice Set the swap type for a specific token.
     * @param _from The address of the token to set the swap type for.
     * @param _swapType The swap type to set.
     */
    function setSwapType(
        address _from,
        SwapType _swapType
    ) external onlyManagement {
        swapType[_from] = _swapType;
    }

    /**
     * @notice Set the `minAmountToSellMapping` for a specific `_token`.
     * @dev This can be used by management to adjust wether or not the
     * _claimAndSellRewards() function will attempt to sell a specific
     * reward token. This can be used if liquidity is to low, amounts
     * are to low or any other reason that may cause reverts.
     *
     * @param _token The address of the token to adjust.
     * @param _amount Min required amount to sell.
     */
    function setMinAmountToSellMapping(
        address _token,
        uint256 _amount
    ) external onlyManagement {
        minAmountToSellMapping[_token] = _amount;
    }

    function _claimAndSellRewards() internal override {
        address[] memory _allRewardTokens = allRewardTokens;
        uint256 _length = _allRewardTokens.length;

        for (uint256 i = 0; i < _length; i++) {
            address token = _allRewardTokens[i];
            SwapType _swapType = swapType[token];
            uint256 balance = ERC20(token).balanceOf(address(this));

            if (balance > minAmountToSellMapping[token]) {
                if (_swapType == SwapType.UNISWAP_V3) {
                    _swapFrom(token, address(asset), balance, 0);
                }
            }
        }
    }

    function kickAuction(
        address _token
    ) external onlyKeepers returns (uint256) {
        require(swapType[_token] == SwapType.AUCTION, "!auction");
        return _kickAuction(_token);
    }

    /**
     * @dev Kick an auction for a given token.
     * @param _from The token that was being sold.
     */
    function _kickAuction(address _from) internal virtual returns (uint256) {
        require(
            _from != address(asset) && _from != address(vault),
            "cannot kick"
        );
        uint256 _balance = ERC20(_from).balanceOf(address(this));
        ERC20(_from).safeTransfer(auction, _balance);
        return IAuction(auction).kick(_from);
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_asset","type":"address"},{"internalType":"string","name":"_name","type":"string"},{"internalType":"address","name":"_vault","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"stateMutability":"nonpayable","type":"fallback"},{"inputs":[{"internalType":"address","name":"_token","type":"address"},{"internalType":"enum MorphoCompounder.SwapType","name":"_swapType","type":"uint8"}],"name":"addRewardToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"allRewardTokens","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"auction","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"availableDepositLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"availableWithdrawLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"balanceOfAsset","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"balanceOfStake","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"balanceOfVault","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"base","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deployFunds","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"doHealthCheck","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"freeFunds","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getAllRewardTokens","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"harvestAndReport","outputs":[{"internalType":"uint256","name":"_totalAssets","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"}],"name":"kickAuction","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"lossLimitRatio","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"minAmountToSell","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"minAmountToSellMapping","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"profitLimitRatio","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"}],"name":"removeRewardToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"router","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_auction","type":"address"}],"name":"setAuction","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_doHealthCheck","type":"bool"}],"name":"setDoHealthCheck","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_newLossLimitRatio","type":"uint256"}],"name":"setLossLimitRatio","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"setMinAmountToSellMapping","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_newProfitLimitRatio","type":"uint256"}],"name":"setProfitLimitRatio","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_from","type":"address"},{"internalType":"enum MorphoCompounder.SwapType","name":"_swapType","type":"uint8"}],"name":"setSwapType","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token0","type":"address"},{"internalType":"address","name":"_token1","type":"address"},{"internalType":"uint24","name":"_fee","type":"uint24"}],"name":"setUniFees","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"shutdownWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"swapType","outputs":[{"internalType":"enum MorphoCompounder.SwapType","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_totalIdle","type":"uint256"}],"name":"tendThis","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"tendTrigger","outputs":[{"internalType":"bool","name":"","type":"bool"},{"internalType":"bytes","name":"","type":"bytes"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokenizedStrategyAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"uniFees","outputs":[{"internalType":"uint24","name":"","type":"uint24"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"valueOfVault","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"vault","outputs":[{"internalType":"contract IStrategy","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"vaultsMaxWithdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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

0x608060405234801561000f575f80fd5b5060043610610225575f3560e01c8063757059491161012e578063ac00ff26116100b6578063f3ce280a1161007a578063f3ce280a146104f0578063f887ea4014610533578063fbfa77cf14610546578063fc7f71b61461056d578063fde813a81461058057610225565b8063ac00ff261461046d578063b4a8d1b614610480578063b8c6f579146104af578063d19a3bb8146104c2578063d6968601146104dd57610225565b8063950b3d73116100fd578063950b3d73146104245780639994673d146104375780639d7fb70c1461043f5780639ee80c5c14610452578063a39591f31461046557610225565b806375705949146103e4578063797bf343146103f75780637d969932146103ff5780637d9f6db51461041157610225565b806349317f1d116101b15780635d265d3f116101805780635d265d3f146103595780635e311fa51461038e5780636718835f146103ad5780636b141ba9146103c957806373adb214146103dc57610225565b806349317f1d146103035780634a5d09431461030b5780635001f3b51461031b578063503160d91461034657610225565b8063286a876b116101f8578063286a876b146102b15780632e3ecf2c146102b75780633d509c97146102ca5780633d6cb575146102dd57806346aa2f12146102f057610225565b806304bd46291461025a57806312edb24c146102805780631814436714610295578063227b9f5a1461029e575b73d377919fa87120584b21279a491f82d5265a139c365f80375f80365f845af43d5f803e808015610254573d5ff35b3d5ffd5b005b61026d6102683660046121e3565b610593565b6040519081526020015b60405180910390f35b6102886105b4565b60405161027791906121fe565b61026d60015481565b6102586102ac36600461224a565b610614565b5f61026d565b6102586102c5366004612274565b6106a2565b6102586102d83660046121e3565b610772565b6102586102eb3660046122c3565b610947565b61026d6102fe3660046121e3565b61095b565b61026d6109e3565b5f54610100900461ffff1661026d565b60025461032e906001600160a01b031681565b6040516001600160a01b039091168152602001610277565b6102586103543660046122c3565b610a02565b60408051600481526024810182526020810180516001600160e01b031663440368a360e01b1790529051610277915f91612327565b61026d61039c3660046121e3565b60066020525f908152604090205481565b5f546103b99060ff1681565b6040519015158152602001610277565b6102586103d7366004612341565b610a13565b61026d610bc8565b6102586103f2366004612341565b610cba565b61026d610d60565b5f546301000000900461ffff1661026d565b60055461032e906001600160a01b031681565b6102586104323660046122c3565b610dae565b61026d610e2a565b61025861044d3660046122c3565b610e78565b61032e6104603660046122c3565b610e80565b61026d610ea8565b61025861047b366004612388565b610eeb565b6104a261048e3660046121e3565b60076020525f908152604090205460ff1681565b60405161027791906123b7565b6102586104bd3660046121e3565b610f71565b61032e73d377919fa87120584b21279a491f82d5265a139c81565b6102586104eb3660046122c3565b611193565b61051f6104fe3660046123dd565b600460209081525f928352604080842090915290825290205462ffffff1681565b60405162ffffff9091168152602001610277565b60035461032e906001600160a01b031681565b61032e7f0000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d4781565b61026d61057b3660046121e3565b61120f565b61025861058e3660046122c3565b6112fa565b5f61059c610bc8565b6105a4610d60565b6105ae919061241d565b92915050565b6060600880548060200260200160405190810160405280929190818152602001828054801561060a57602002820191905f5260205f20905b81546001600160a01b031681526001909101906020018083116105ec575b5050505050905090565b6040516348e4a64960e01b81523360048201527f000000000000000000000000156c729c78076b7cd815d01ca6967c00c5ac8d9c6001600160a01b0316906348e4a649906024015f6040518083038186803b158015610671575f80fd5b505afa158015610683573d5f803e3d5ffd5b5050506001600160a01b039092165f9081526006602052604090205550565b6040516348e4a64960e01b81523360048201527f000000000000000000000000156c729c78076b7cd815d01ca6967c00c5ac8d9c6001600160a01b0316906348e4a649906024015f6040518083038186803b1580156106ff575f80fd5b505afa158015610711573d5f803e3d5ffd5b5050506001600160a01b038085165f8181526004602081815260408084209589168452948152848320805462ffffff1990811662ffffff8a16908117909255928252858420948452939052929020805490921617905550505050565b505050565b6040516348e4a64960e01b81523360048201527f000000000000000000000000156c729c78076b7cd815d01ca6967c00c5ac8d9c6001600160a01b0316906348e4a649906024015f6040518083038186803b1580156107cf575f80fd5b505afa1580156107e1573d5f803e3d5ffd5b505060088054604080516020808402820181019092528281525f9550935083018282801561083657602002820191905f5260205f20905b81546001600160a01b03168152600190910190602001808311610818575b505083519394505f925050505b8181101561091957836001600160a01b031683828151811061086757610867612430565b60200260200101516001600160a01b0316036109115782610889600184612444565b8151811061089957610899612430565b6020026020010151600882815481106108b4576108b4612430565b905f5260205f20015f6101000a8154816001600160a01b0302191690836001600160a01b0316021790555060088054806108f0576108f0612457565b5f8281526020902081015f1990810180546001600160a01b03191690550190555b600101610843565b5050506001600160a01b03165f908152600760209081526040808320805460ff191690556006909152812055565b61094f61130b565b61095881611344565b50565b60405163402d267d60e01b81523060048201525f907f0000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d476001600160a01b03169063402d267d90602401602060405180830381865afa1580156109bf573d5f803e3d5ffd5b505050506040513d601f19601f820116820180604052508101906105ae919061246b565b5f6109ec61130b565b6109f4611491565b90506109ff816114b4565b90565b610a0a61130b565b610958816115fb565b6040516348e4a64960e01b81523360048201527f000000000000000000000000156c729c78076b7cd815d01ca6967c00c5ac8d9c6001600160a01b0316906348e4a649906024015f6040518083038186803b158015610a70575f80fd5b505afa158015610a82573d5f803e3d5ffd5b505050507f0000000000000000000000002dca96907fde857dd3d816880a0df407eeb2d2f26001600160a01b0316826001600160a01b031614158015610afa57507f0000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d476001600160a01b0316826001600160a01b031614155b610b4b5760405162461bcd60e51b815260206004820152601860248201527f63616e6e6f7420626520612072657761726420746f6b656e000000000000000060448201526064015b60405180910390fd5b6008805460018082019092557ff3f7a9fe364faab93b216da50a3214154f22a0a2b415b23a84c8169e8b636ee30180546001600160a01b0319166001600160a01b0385169081179091555f9081526007602052604090208054839260ff1990911690836002811115610bbf57610bbf6123a3565b02179055505050565b604051636c82bbbf60e11b81523060048201525f907f0000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d476001600160a01b0316906307a2d13a90829063d905777e90602401602060405180830381865afa158015610c34573d5f803e3d5ffd5b505050506040513d601f19601f82011682018060405250810190610c58919061246b565b6040518263ffffffff1660e01b8152600401610c7691815260200190565b602060405180830381865afa158015610c91573d5f803e3d5ffd5b505050506040513d601f19601f82011682018060405250810190610cb5919061246b565b905090565b6040516348e4a64960e01b81523360048201527f000000000000000000000000156c729c78076b7cd815d01ca6967c00c5ac8d9c6001600160a01b0316906348e4a649906024015f6040518083038186803b158015610d17575f80fd5b505afa158015610d29573d5f803e3d5ffd5b5050506001600160a01b0383165f908152600760205260409020805483925060ff19166001836002811115610bbf57610bbf6123a3565b6040516370a0823160e01b81523060048201525f907f0000000000000000000000002dca96907fde857dd3d816880a0df407eeb2d2f26001600160a01b0316906370a0823190602401610c76565b6040516348e4a64960e01b81523360048201527f000000000000000000000000156c729c78076b7cd815d01ca6967c00c5ac8d9c6001600160a01b0316906348e4a649906024015f6040518083038186803b158015610e0b575f80fd5b505afa158015610e1d573d5f803e3d5ffd5b5050505061095881611689565b6040516370a0823160e01b81523060048201525f907f0000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d476001600160a01b0316906370a0823190602401610c76565b61095861130b565b60088181548110610e8f575f80fd5b5f918252602090912001546001600160a01b0316905081565b5f6001600160a01b037f0000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d47166307a2d13a82610ee1610e2a565b610c58919061241d565b6040516348e4a64960e01b81523360048201527f000000000000000000000000156c729c78076b7cd815d01ca6967c00c5ac8d9c6001600160a01b0316906348e4a649906024015f6040518083038186803b158015610f48575f80fd5b505afa158015610f5a573d5f803e3d5ffd5b50505f805460ff1916931515939093179092555050565b6040516348e4a64960e01b81523360048201527f000000000000000000000000156c729c78076b7cd815d01ca6967c00c5ac8d9c6001600160a01b0316906348e4a649906024015f6040518083038186803b158015610fce575f80fd5b505afa158015610fe0573d5f803e3d5ffd5b505050506001600160a01b03811615611171577f0000000000000000000000002dca96907fde857dd3d816880a0df407eeb2d2f26001600160a01b0316816001600160a01b0316631f1fcd516040518163ffffffff1660e01b8152600401602060405180830381865afa158015611059573d5f803e3d5ffd5b505050506040513d601f19601f8201168201806040525081019061107d9190612482565b6001600160a01b0316146110c05760405162461bcd60e51b815260206004820152600a6024820152691ddc9bdb99c81dd85b9d60b21b6044820152606401610b42565b306001600160a01b0316816001600160a01b031663f7260d3e6040518163ffffffff1660e01b8152600401602060405180830381865afa158015611106573d5f803e3d5ffd5b505050506040513d601f19601f8201168201806040525081019061112a9190612482565b6001600160a01b0316146111715760405162461bcd60e51b815260206004820152600e60248201526d3bb937b733903932b1b2b4bb32b960911b6044820152606401610b42565b600580546001600160a01b0319166001600160a01b0392909216919091179055565b6040516348e4a64960e01b81523360048201527f000000000000000000000000156c729c78076b7cd815d01ca6967c00c5ac8d9c6001600160a01b0316906348e4a649906024015f6040518083038186803b1580156111f0575f80fd5b505afa158015611202573d5f803e3d5ffd5b5050505061095881611722565b60405163d43fdcf760e01b81523360048201525f907f000000000000000000000000156c729c78076b7cd815d01ca6967c00c5ac8d9c6001600160a01b03169063d43fdcf7906024015f6040518083038186803b15801561126e575f80fd5b505afa158015611280573d5f803e3d5ffd5b506002925061128d915050565b6001600160a01b0383165f9081526007602052604090205460ff1660028111156112b9576112b96123a3565b146112f15760405162461bcd60e51b815260206004820152600860248201526710b0bab1ba34b7b760c11b6044820152606401610b42565b6105ae82611782565b61130261130b565b6109588161192a565b3330146113425760405162461bcd60e51b815260206004820152600560248201526410b9b2b63360d91b6044820152606401610b42565b565b604051630a28a47760e01b8152600481018290525f907f0000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d476001600160a01b031690630a28a47790602401602060405180830381865afa1580156113a9573d5f803e3d5ffd5b505050506040513d601f19601f820116820180604052508101906113cd919061246b565b90505f6113d8610e2a565b9050808211156113f6576113f3826113ee610e2a565b61193e565b91505b604051635d043b2960e11b815260048101839052306024820181905260448201527f0000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d476001600160a01b03169063ba087652906064016020604051808303815f875af1158015611467573d5f803e3d5ffd5b505050506040513d601f19601f8201168201806040525081019061148b919061246b565b50505050565b5f61149a611953565b6114a2610ea8565b6114aa610d60565b610cb5919061241d565b5f5460ff166114cc57505f805460ff19166001179055565b5f7f000000000000000000000000156c729c78076b7cd815d01ca6967c00c5ac8d9c6001600160a01b03166301e1d1146040518163ffffffff1660e01b8152600401602060405180830381865afa158015611529573d5f803e3d5ffd5b505050506040513d601f19601f8201168201806040525081019061154d919061246b565b9050808211156115c4575f546127109061157090610100900461ffff168361249d565b61157a91906124b4565b6115848284612444565b11156115c05760405162461bcd60e51b815260206004820152600b60248201526a6865616c7468436865636b60a81b6044820152606401610b42565b5050565b818111156115c0575f54612710906115e7906301000000900461ffff168361249d565b6115f191906124b4565b6115848383612444565b604051636e553f6560e01b8152600481018290523060248201527f0000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d476001600160a01b031690636e553f65906044016020604051808303815f875af1158015611665573d5f803e3d5ffd5b505050506040513d601f19601f820116820180604052508101906115c0919061246b565b5f81116116c75760405162461bcd60e51b815260206004820152600c60248201526b085e995c9bc81c1c9bd99a5d60a21b6044820152606401610b42565b61ffff8111156117055760405162461bcd60e51b8152602060048201526009602482015268042e8dede40d0d2ced60bb1b6044820152606401610b42565b5f805461ffff9092166101000262ffff0019909216919091179055565b61271081106117615760405162461bcd60e51b815260206004820152600b60248201526a085b1bdcdcc81b1a5b5a5d60aa1b6044820152606401610b42565b5f805461ffff90921663010000000264ffff00000019909216919091179055565b5f7f0000000000000000000000002dca96907fde857dd3d816880a0df407eeb2d2f26001600160a01b0316826001600160a01b0316141580156117f757507f0000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d476001600160a01b0316826001600160a01b031614155b6118315760405162461bcd60e51b815260206004820152600b60248201526a63616e6e6f74206b69636b60a81b6044820152606401610b42565b6040516370a0823160e01b81523060048201525f906001600160a01b038416906370a0823190602401602060405180830381865afa158015611875573d5f803e3d5ffd5b505050506040513d601f19601f82011682018060405250810190611899919061246b565b6005549091506118b6906001600160a01b03858116911683611acb565b6005546040516396c5517560e01b81526001600160a01b038581166004830152909116906396c55175906024016020604051808303815f875af11580156118ff573d5f803e3d5ffd5b505050506040513d601f19601f82011682018060405250810190611923919061246b565b9392505050565b610958611939826113ee610bc8565b611344565b5f81831061194c5781611923565b5090919050565b5f60088054806020026020016040519081016040528092919081815260200182805480156119a857602002820191905f5260205f20905b81546001600160a01b0316815260019091019060200180831161198a575b505083519394505f925050505b8181101561076d575f8382815181106119d0576119d0612430565b6020908102919091018101516001600160a01b0381165f818152600790935260408084205490516370a0823160e01b815230600482015292945060ff1692916370a0823190602401602060405180830381865afa158015611a33573d5f803e3d5ffd5b505050506040513d601f19601f82011682018060405250810190611a57919061246b565b6001600160a01b0384165f90815260066020526040902054909150811115611ac0576001826002811115611a8d57611a8d6123a3565b03611ac057611abe837f0000000000000000000000002dca96907fde857dd3d816880a0df407eeb2d2f2835f611b2e565b505b5050506001016119b5565b6040516001600160a01b03831660248201526044810182905261076d90849063a9059cbb60e01b906064015b60408051601f198184030181529190526020810180516001600160e01b03166001600160e01b031990931692909217909152611dc8565b5f600154831115611dc057600354611b50906001600160a01b03168685611e9b565b6002546001600160a01b0386811691161480611b7957506002546001600160a01b038581169116145b15611c925760408051610100810182526001600160a01b0387811680835287821660208085018281525f9384526004808352878520938552929091528583205462ffffff9081168688019081523060608801908152426080890190815260a089018d815260c08a018d815260e08b019889526003549b5163414bf38960e01b81528b518b1698810198909852955189166024880152925190931660448601525186166064850152905160848401525160a48301525160c48201529051821660e48201529192169063414bf38990610104016020604051808303815f875af1158015611c66573d5f803e3d5ffd5b505050506040513d601f19601f82011682018060405250810190611c8a919061246b565b915050611dc0565b6001600160a01b038581165f9081526004602081815260408084206002548087168652908352818520548484528286208b881687528452948290205482516bffffffffffffffffffffffff1960608e811b8216968301969096526001600160e81b031960e898891b8116603484015293861b811660378301529190961b909116604b8601529189901b909116604e8401528051808403604201815260035461010285018352606285018281523060828701524260a287015260c286018a905260e2909501889052915163c04b8d5960e01b81529094919091169263c04b8d5992611d7c92016124d3565b6020604051808303815f875af1158015611d98573d5f803e3d5ffd5b505050506040513d601f19601f82011682018060405250810190611dbc919061246b565b9150505b949350505050565b5f611e1c826040518060400160405280602081526020017f5361666545524332303a206c6f772d6c6576656c2063616c6c206661696c6564815250856001600160a01b0316611f3a9092919063ffffffff16565b905080515f1480611e3c575080806020019051810190611e3c919061252a565b61076d5760405162461bcd60e51b815260206004820152602a60248201527f5361666545524332303a204552433230206f7065726174696f6e20646964206e6044820152691bdd081cdd58d8d9595960b21b6064820152608401610b42565b604051636eb1769f60e11b81523060048201526001600160a01b03848116602483015282919084169063dd62ed3e90604401602060405180830381865afa158015611ee8573d5f803e3d5ffd5b505050506040513d601f19601f82011682018060405250810190611f0c919061246b565b101561076d57611f266001600160a01b038316845f611f48565b61076d6001600160a01b0383168483611f48565b6060611dc084845f8561205b565b801580611fc05750604051636eb1769f60e11b81523060048201526001600160a01b03838116602483015284169063dd62ed3e90604401602060405180830381865afa158015611f9a573d5f803e3d5ffd5b505050506040513d601f19601f82011682018060405250810190611fbe919061246b565b155b61202b5760405162461bcd60e51b815260206004820152603660248201527f5361666545524332303a20617070726f76652066726f6d206e6f6e2d7a65726f60448201527520746f206e6f6e2d7a65726f20616c6c6f77616e636560501b6064820152608401610b42565b6040516001600160a01b03831660248201526044810182905261076d90849063095ea7b360e01b90606401611af7565b6060824710156120bc5760405162461bcd60e51b815260206004820152602660248201527f416464726573733a20696e73756666696369656e742062616c616e636520666f6044820152651c8818d85b1b60d21b6064820152608401610b42565b5f80866001600160a01b031685876040516120d79190612545565b5f6040518083038185875af1925050503d805f8114612111576040519150601f19603f3d011682016040523d82523d5f602084013e612116565b606091505b509150915061212787838387612132565b979650505050505050565b606083156121a05782515f03612199576001600160a01b0385163b6121995760405162461bcd60e51b815260206004820152601d60248201527f416464726573733a2063616c6c20746f206e6f6e2d636f6e74726163740000006044820152606401610b42565b5081611dc0565b611dc083838151156121b55781518083602001fd5b8060405162461bcd60e51b8152600401610b429190612560565b6001600160a01b0381168114610958575f80fd5b5f602082840312156121f3575f80fd5b8135611923816121cf565b602080825282518282018190525f9190848201906040850190845b8181101561223e5783516001600160a01b031683529284019291840191600101612219565b50909695505050505050565b5f806040838503121561225b575f80fd5b8235612266816121cf565b946020939093013593505050565b5f805f60608486031215612286575f80fd5b8335612291816121cf565b925060208401356122a1816121cf565b9150604084013562ffffff811681146122b8575f80fd5b809150509250925092565b5f602082840312156122d3575f80fd5b5035919050565b5f5b838110156122f45781810151838201526020016122dc565b50505f910152565b5f81518084526123138160208601602086016122da565b601f01601f19169290920160200192915050565b8215158152604060208201525f611dc060408301846122fc565b5f8060408385031215612352575f80fd5b823561235d816121cf565b9150602083013560038110612370575f80fd5b809150509250929050565b8015158114610958575f80fd5b5f60208284031215612398575f80fd5b81356119238161237b565b634e487b7160e01b5f52602160045260245ffd5b60208101600383106123d757634e487b7160e01b5f52602160045260245ffd5b91905290565b5f80604083850312156123ee575f80fd5b82356123f9816121cf565b91506020830135612370816121cf565b634e487b7160e01b5f52601160045260245ffd5b808201808211156105ae576105ae612409565b634e487b7160e01b5f52603260045260245ffd5b818103818111156105ae576105ae612409565b634e487b7160e01b5f52603160045260245ffd5b5f6020828403121561247b575f80fd5b5051919050565b5f60208284031215612492575f80fd5b8151611923816121cf565b80820281158282048414176105ae576105ae612409565b5f826124ce57634e487b7160e01b5f52601260045260245ffd5b500490565b602081525f825160a060208401526124ee60c08401826122fc565b905060018060a01b0360208501511660408401526040840151606084015260608401516080840152608084015160a08401528091505092915050565b5f6020828403121561253a575f80fd5b81516119238161237b565b5f82516125568184602087016122da565b9190910192915050565b602081525f61192360208301846122fc56fea2646970667358221220b1a4e659c98829db33fc38bb618aeb4d90a36c9fd3f805189999d43aac7b664f64736f6c63430008170033

0000000000000000000000002dca96907fde857dd3d816880a0df407eeb2d2f200000000000000000000000000000000000000000000000000000000000000600000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d47000000000000000000000000000000000000000000000000000000000000001f4d6f7270686f20596561726e204f47205553445420436f6d706f756e64657200

-----Decoded View---------------
Arg [0] : _asset (address): 0x2DCa96907fde857dd3D816880A0df407eeB2D2F2
Arg [1] : _name (string): Morpho Yearn OG USDT Compounder
Arg [2] : _vault (address): 0x8ED68f91AfbE5871dCE31ae007a936ebE8511d47

-----Encoded View---------------
5 Constructor Arguments found :
Arg [0] : 0000000000000000000000002dca96907fde857dd3d816880a0df407eeb2d2f2
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000060
Arg [2] : 0000000000000000000000008ed68f91afbe5871dce31ae007a936ebe8511d47
Arg [3] : 000000000000000000000000000000000000000000000000000000000000001f
Arg [4] : 4d6f7270686f20596561726e204f47205553445420436f6d706f756e64657200

117824:4762:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;78086:42;93931:14;93680:33;;93912:34;94193:1;94173;94140:14;94120:1;94076:25;94052:5;94021:188;94281:16;94278:1;94275;94260:38;94387:6;94407:68;;;;94526:16;94523:1;94516:27;94407:68;94443:16;94440:1;94433:27;94380:178;;116254:257;;;;;;:::i;:::-;;:::i;:::-;;;548:25:1;;;536:2;521:18;116254:257:0;;;;;;;;119541:112;;;:::i;:::-;;;;;;;:::i;101130:30::-;;;;;;121063:176;;;;;;:::i;:::-;;:::i;113300:66::-;113355:7;113300:66;;120036:179;;;;;;:::i;:::-;;:::i;119026:507::-;;;;;;:::i;:::-;;:::i;89966:100::-;;;;;;:::i;:::-;;:::i;115213:229::-;;;;;;:::i;:::-;;:::i;98643:319::-;;;:::i;96209:101::-;96258:7;96285:17;;;;;;96209:101;;101204:64;;;;;-1:-1:-1;;;;;101204:64:0;;;;;;-1:-1:-1;;;;;2479:32:1;;;2461:51;;2449:2;2434:18;101204:64:0;2315:203:1;89382:104:0;;;;;;:::i;:::-;;:::i;85117:318::-;85360:56;;;;;;;;;;;;;;;;-1:-1:-1;;;;;85360:56:0;-1:-1:-1;;;85360:56:0;;;85117:318;;;;-1:-1:-1;;85117:318:0;:::i;118247:57::-;;;;;;:::i;:::-;;;;;;;;;;;;;;95646:32;;;;;;;;;;;;3521:14:1;;3514:22;3496:41;;3484:2;3469:18;95646:32:0;3356:187:1;118686:332:0;;;;;;:::i;:::-;;:::i;114043:146::-;;;:::i;120416:151::-;;;;;;:::i;:::-;;:::i;112800:120::-;;;:::i;96503:97::-;96550:7;96577:15;;;;;;96503:97;;118014:22;;;;;-1:-1:-1;;;;;118014:22:0;;;96795:160;;;;;;:::i;:::-;;:::i;113021:120::-;;;:::i;91285:100::-;;;;;;:::i;:::-;;:::i;118366:32::-;;;;;;:::i;:::-;;:::i;113525:146::-;;;:::i;98358:118::-;;;;;;:::i;:::-;;:::i;118313:44::-;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;:::i;119661:367::-;;;;;;:::i;:::-;;:::i;78026:102::-;;78086:42;78026:102;;97611:152;;;;;;:::i;:::-;;:::i;101582:61::-;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;5377:8:1;5365:21;;;5347:40;;5335:2;5320:18;101582:61:0;5203:190:1;101327:66:0;;;;;-1:-1:-1;;;;;101327:66:0;;;108233:32;;;;;121880:206;;;;;;:::i;:::-;;:::i;91914:115::-;;;;;;:::i;:::-;;:::i;116254:257::-;116349:7;116484:19;:17;:19::i;:::-;116465:16;:14;:16::i;:::-;:38;;;;:::i;:::-;116458:45;116254:257;-1:-1:-1;;116254:257:0:o;119541:112::-;119594:16;119630:15;119623:22;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;119623:22:0;;;;;;;;;;;;;;;;;;;;;;;119541:112;:::o;121063:176::-;76487:47;;-1:-1:-1;;;76487:47:0;;76523:10;76487:47;;;2461:51:1;76487:17:0;-1:-1:-1;;;;;76487:35:0;;;;2434:18:1;;76487:47:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;;;121191:30:0;;::::1;;::::0;;;:22:::1;:30;::::0;;;;:40;-1:-1:-1;121063:176:0:o;120036:179::-;76487:47;;-1:-1:-1;;;76487:47:0;;76523:10;76487:47;;;2461:51:1;76487:17:0;-1:-1:-1;;;;;76487:35:0;;;;2434:18:1;;76487:47:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;;;102081:16:0;;;;;;;:7;:16;;;;;;;;:25;;;;;;;;;;;:32;;-1:-1:-1;;102081:32:0;;;;;;;;;;;;102124:16;;;;;;:25;;;;;;;;;:32;;;;;;;;-1:-1:-1;120036:179:0;;;:::o;120172:35::-:1;120036:179:::0;;;:::o;119026:507::-;76487:47;;-1:-1:-1;;;76487:47:0;;76523:10;76487:47;;;2461:51:1;76487:17:0;-1:-1:-1;;;;;76487:35:0;;;;2434:18:1;;76487:47:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;119140:15:0::1;119104:51:::0;;::::1;::::0;;::::1;::::0;;::::1;::::0;;;;;;;;;;:33:::1;::::0;-1:-1:-1;119104:51:0;-1:-1:-1;119104:51:0;::::1;119140:15:::0;119104:51;;::::1;;;;;;;;;;;;;;;;::::0;;-1:-1:-1;;;;;119104:51:0::1;::::0;;;;;::::1;::::0;::::1;;::::0;;::::1;;;;-1:-1:-1::0;;119184:23:0;;119104:51;;-1:-1:-1;119166:15:0::1;::::0;-1:-1:-1;;;119220:224:0::1;119244:7;119240:1;:11;119220:224;;;119300:6;-1:-1:-1::0;;;;;119277:29:0::1;:16;119294:1;119277:19;;;;;;;;:::i;:::-;;;;;;;-1:-1:-1::0;;;;;119277:29:0::1;::::0;119273:160:::1;;119348:16:::0;119365:11:::1;119375:1;119365:7:::0;:11:::1;:::i;:::-;119348:29;;;;;;;;:::i;:::-;;;;;;;119327:15;119343:1;119327:18;;;;;;;;:::i;:::-;;;;;;;;;:50;;;;;-1:-1:-1::0;;;;;119327:50:0::1;;;;;-1:-1:-1::0;;;;;119327:50:0::1;;;;;;119396:15;:21;;;;;;;:::i;:::-;;::::0;;;::::1;::::0;;;;-1:-1:-1;;119396:21:0;;;;;-1:-1:-1;;;;;;119396:21:0::1;::::0;;;;;119273:160:::1;119253:3;;119220:224;;;-1:-1:-1::0;;;;;;;;119461:16:0::1;;::::0;;;:8:::1;:16;::::0;;;;;;;119454:23;;-1:-1:-1;;119454:23:0::1;::::0;;119495:22:::1;:30:::0;;;;;119488:37;119026:507::o;89966:100::-;76310:11;:9;:11::i;:::-;90039:19:::1;90050:7;90039:10;:19::i;:::-;89966:100:::0;:::o;115213:229::-;115403:31;;-1:-1:-1;;;115403:31:0;;115428:4;115403:31;;;2461:51:1;115307:7:0;;115403:5;-1:-1:-1;;;;;115403:16:0;;;;2434:18:1;;115403:31:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;98643:319::-;98743:20;76310:11;:9;:11::i;:::-;98833:19:::1;:17;:19::i;:::-;98818:34;;98921:33;98941:12;98921:19;:33::i;:::-;98643:319:::0;:::o;89382:104::-;76310:11;:9;:11::i;:::-;89457:21:::1;89470:7;89457:12;:21::i;118686:332::-:0;76487:47;;-1:-1:-1;;;76487:47:0;;76523:10;76487:47;;;2461:51:1;76487:17:0;-1:-1:-1;;;;;76487:35:0;;;;2434:18:1;;76487:47:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;118846:5:::1;-1:-1:-1::0;;;;;118828:24:0::1;:6;-1:-1:-1::0;;;;;118828:24:0::1;;;:52;;;;;118874:5;-1:-1:-1::0;;;;;118856:24:0::1;:6;-1:-1:-1::0;;;;;118856:24:0::1;;;118828:52;118806:126;;;::::0;-1:-1:-1;;;118806:126:0;;6674:2:1;118806:126:0::1;::::0;::::1;6656:21:1::0;6713:2;6693:18;;;6686:30;6752:26;6732:18;;;6725:54;6796:18;;118806:126:0::1;;;;;;;;;118943:15;:28:::0;;::::1;::::0;;::::1;::::0;;;;::::1;::::0;;-1:-1:-1;;;;;;118943:28:0::1;-1:-1:-1::0;;;;;118943:28:0;::::1;::::0;;::::1;::::0;;;-1:-1:-1;118982:16:0;;;:8:::1;118943:28;118982:16:::0;;;;:28;;119001:9;;-1:-1:-1;;118982:28:0;;::::1;::::0;119001:9;118982:28:::1;::::0;::::1;;;;;;:::i;:::-;;;;;;118686:332:::0;;:::o;114043:146::-;114150:30;;-1:-1:-1;;;114150:30:0;;114174:4;114150:30;;;2461:51:1;114101:7:0;;114128:5;-1:-1:-1;;;;;114128:21:0;;;;;;114150:15;;2434:18:1;;114150:30:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;114128:53;;;;;;;;;;;;;548:25:1;;536:2;521:18;;402:177;114128:53:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;114121:60;;114043:146;:::o;120416:151::-;76487:47;;-1:-1:-1;;;76487:47:0;;76523:10;76487:47;;;2461:51:1;76487:17:0;-1:-1:-1;;;;;76487:35:0;;;;2434:18:1;;76487:47:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;;;120532:15:0;::::1;;::::0;;;:8:::1;:15;::::0;;;;:27;;120550:9;;-1:-1:-1;;;120532:27:0::1;::::0;120550:9;120532:27:::1;::::0;::::1;;;;;;:::i;112800:120::-:0;112882:30;;-1:-1:-1;;;112882:30:0;;112906:4;112882:30;;;2461:51:1;112855:7:0;;112882:5;-1:-1:-1;;;;;112882:15:0;;;;2434:18:1;;112882:30:0;2315:203:1;96795:160:0;76487:47;;-1:-1:-1;;;76487:47:0;;76523:10;76487:47;;;2461:51:1;76487:17:0;-1:-1:-1;;;;;76487:35:0;;;;2434:18:1;;76487:47:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;96905:42:::1;96926:20;96905;:42::i;113021:120::-:0;113103:30;;-1:-1:-1;;;113103:30:0;;113127:4;113103:30;;;2461:51:1;113076:7:0;;113103:5;-1:-1:-1;;;;;113103:15:0;;;;2434:18:1;;113103:30:0;2315:203:1;91285:100:0;76310:11;:9;:11::i;118366:32::-;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;118366:32:0;;-1:-1:-1;118366:32:0;:::o;113525:146::-;113578:7;-1:-1:-1;;;;;113605:5:0;:21;;113578:7;113627:16;:14;:16::i;:::-;:35;;;;:::i;98358:118::-;76487:47;;-1:-1:-1;;;76487:47:0;;76523:10;76487:47;;;2461:51:1;76487:17:0;-1:-1:-1;;;;;76487:35:0;;;;2434:18:1;;76487:47:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;98438:13:0::1;:30:::0;;-1:-1:-1;;98438:30:0::1;::::0;::::1;;::::0;;;::::1;::::0;;;-1:-1:-1;;98358:118:0:o;119661:367::-;76487:47;;-1:-1:-1;;;76487:47:0;;76523:10;76487:47;;;2461:51:1;76487:17:0;-1:-1:-1;;;;;76487:35:0;;;;2434:18:1;;76487:47:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;119738:22:0;::::1;::::0;119734:258:::1;;119822:5;-1:-1:-1::0;;;;;119785:43:0::1;119794:8;-1:-1:-1::0;;;;;119785:23:0::1;;:25;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;-1:-1:-1::0;;;;;119785:43:0::1;;119777:66;;;::::0;-1:-1:-1;;;119777:66:0;;7283:2:1;119777:66:0::1;::::0;::::1;7265:21:1::0;7322:2;7302:18;;;7295:30;-1:-1:-1;;;7341:18:1;;;7334:40;7391:18;;119777:66:0::1;7081:334:1::0;119777:66:0::1;119925:4;-1:-1:-1::0;;;;;119884:46:0::1;119893:8;-1:-1:-1::0;;;;;119884:27:0::1;;:29;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;-1:-1:-1::0;;;;;119884:46:0::1;;119858:122;;;::::0;-1:-1:-1;;;119858:122:0;;7622:2:1;119858:122:0::1;::::0;::::1;7604:21:1::0;7661:2;7641:18;;;7634:30;-1:-1:-1;;;7680:18:1;;;7673:44;7734:18;;119858:122:0::1;7420:338:1::0;119858:122:0::1;120002:7;:18:::0;;-1:-1:-1;;;;;;120002:18:0::1;-1:-1:-1::0;;;;;120002:18:0;;;::::1;::::0;;;::::1;::::0;;119661:367::o;97611:152::-;76487:47;;-1:-1:-1;;;76487:47:0;;76523:10;76487:47;;;2461:51:1;76487:17:0;-1:-1:-1;;;;;76487:35:0;;;;2434:18:1;;76487:47:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;97717:38:::1;97736:18;97717;:38::i;121880:206::-:0;76726:55;;-1:-1:-1;;;76726:55:0;;76770:10;76726:55;;;2461:51:1;121963:7:0;;76726:17;-1:-1:-1;;;;;76726:43:0;;;;2434:18:1;;76726:55:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;122011:16:0::1;::::0;-1:-1:-1;121991:36:0::1;::::0;-1:-1:-1;;121991:36:0;::::1;-1:-1:-1::0;;;;;121991:16:0;::::1;;::::0;;;:8:::1;:16;::::0;;;;;::::1;;:36;::::0;::::1;;;;;;:::i;:::-;;121983:57;;;::::0;-1:-1:-1;;;121983:57:0;;7965:2:1;121983:57:0::1;::::0;::::1;7947:21:1::0;8004:1;7984:18;;;7977:29;-1:-1:-1;;;8022:18:1;;;8015:38;8070:18;;121983:57:0::1;7763:331:1::0;121983:57:0::1;122058:20;122071:6;122058:12;:20::i;91914:115::-:0;76310:11;:9;:11::i;:::-;91994:27:::1;92013:7;91994:18;:27::i;77154:99::-:0;77208:10;77230:4;77208:27;77200:45;;;;-1:-1:-1;;;77200:45:0;;8301:2:1;77200:45:0;;;8283:21:1;8340:1;8320:18;;;8313:29;-1:-1:-1;;;8358:18:1;;;8351:35;8403:18;;77200:45:0;8099:328:1;77200:45:0;77154:99::o;110303:486::-;110439:30;;-1:-1:-1;;;110439:30:0;;;;;548:25:1;;;110422:14:0;;110439:5;-1:-1:-1;;;;;110439:21:0;;;;521:18:1;;110439:30:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;110422:47;;110482:20;110505:16;:14;:16::i;:::-;110482:39;;110545:12;110536:6;:21;110532:187;;;110673:34;110682:6;110690:16;:14;:16::i;:::-;110673:8;:34::i;:::-;110664:43;;110532:187;110731:50;;-1:-1:-1;;;110731:50:0;;;;;8634:25:1;;;110760:4:0;8713:18:1;;;8706:43;;;8765:18;;;8758:43;110731:5:0;-1:-1:-1;;;;;110731:12:0;;;;8607:18:1;;110731:50:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;110366:423;;110303:486;:::o;111829:302::-;111929:20;112007:22;:20;:22::i;:::-;112109:14;:12;:14::i;:::-;112090:16;:14;:16::i;:::-;:33;;;;:::i;99190:914::-;99277:13;;;;99272:88;;-1:-1:-1;99307:13:0;:20;;-1:-1:-1;;99307:20:0;99323:4;99307:20;;;99190:914::o;99272:88::-;99438:26;99467:17;-1:-1:-1;;;;;99467:29:0;;:31;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;99438:60;;99533:18;99515:15;:36;99511:586;;;99688:17;;95723:6;;99659:47;;99688:17;;;;;99659:18;:47;:::i;:::-;99658:84;;;;:::i;:::-;99596:36;99614:18;99596:15;:36;:::i;:::-;99595:147;;99568:222;;;;-1:-1:-1;;;99568:222:0;;9409:2:1;99568:222:0;;;9391:21:1;9448:2;9428:18;;;9421:30;-1:-1:-1;;;9467:18:1;;;9460:41;9518:18;;99568:222:0;9207:335:1;99568:222:0;99261:843;99190:914;:::o;99511:586::-;99833:15;99812:18;:36;99808:289;;;99984:15;;95723:6;;99955:45;;99984:15;;;;;99955:18;:45;:::i;:::-;99954:82;;;;:::i;:::-;99892:36;99913:15;99892:18;:36;:::i;109240:140::-;109316:37;;-1:-1:-1;;;109316:37:0;;;;;9721:25:1;;;109347:4:0;9762:18:1;;;9755:60;109316:5:0;-1:-1:-1;;;;;109316:13:0;;;;9694:18:1;;109316:37:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;97153:269::-;97264:1;97241:20;:24;97233:49;;;;-1:-1:-1;;;97233:49:0;;10028:2:1;97233:49:0;;;10010:21:1;10067:2;10047:18;;;10040:30;-1:-1:-1;;;10086:18:1;;;10079:42;10138:18;;97233:49:0;9826:336:1;97233:49:0;97325:16;97301:40;;;97293:62;;;;-1:-1:-1;;;97293:62:0;;10369:2:1;97293:62:0;;;10351:21:1;10408:1;10388:18;;;10381:29;-1:-1:-1;;;10426:18:1;;;10419:39;10475:18;;97293:62:0;10167:332:1;97293:62:0;97366:17;:48;;;;;;;;-1:-1:-1;;97366:48:0;;;;;;;;;97153:269::o;97955:191::-;95723:6;98039:18;:28;98031:52;;;;-1:-1:-1;;;98031:52:0;;10706:2:1;98031:52:0;;;10688:21:1;10745:2;10725:18;;;10718:30;-1:-1:-1;;;10764:18:1;;;10757:41;10815:18;;98031:52:0;10504:335:1;98031:52:0;98094:15;:44;;;;;;;;-1:-1:-1;;98094:44:0;;;;;;;;;97955:191::o;122212:371::-;122275:7;122334:5;-1:-1:-1;;;;;122317:23:0;:5;-1:-1:-1;;;;;122317:23:0;;;:50;;;;;122361:5;-1:-1:-1;;;;;122344:23:0;:5;-1:-1:-1;;;;;122344:23:0;;;122317:50;122295:111;;;;-1:-1:-1;;;122295:111:0;;11046:2:1;122295:111:0;;;11028:21:1;11085:2;11065:18;;;11058:30;-1:-1:-1;;;11104:18:1;;;11097:41;11155:18;;122295:111:0;10844:335:1;122295:111:0;122436:37;;-1:-1:-1;;;122436:37:0;;122467:4;122436:37;;;2461:51:1;122417:16:0;;-1:-1:-1;;;;;122436:22:0;;;;;2434:18:1;;122436:37:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;122510:7;;122417:56;;-1:-1:-1;122484:44:0;;-1:-1:-1;;;;;122484:25:0;;;;122510:7;122417:56;122484:25;:44::i;:::-;122555:7;;122546:29;;-1:-1:-1;;;122546:29:0;;-1:-1:-1;;;;;2479:32:1;;;122546:29:0;;;2461:51:1;122555:7:0;;;;122546:22;;2434:18:1;;122546:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;122539:36;122212:371;-1:-1:-1;;;122212:371:0:o;117418:140::-;117500:50;117511:38;117520:7;117529:19;:17;:19::i;117511:38::-;117500:10;:50::i;20361:106::-;20419:7;20450:1;20446;:5;:13;;20458:1;20446:13;;;-1:-1:-1;20454:1:0;;20439:20;-1:-1:-1;20361:106:0:o;121247:625::-;121308:33;121344:15;121308:51;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;121308:51:0;;;;;;;;;;;;;;;;-1:-1:-1;;121388:23:0;;121308:51;;-1:-1:-1;121370:15:0;;-1:-1:-1;;;121424:441:0;121448:7;121444:1;:11;121424:441;;;121477:13;121493:16;121510:1;121493:19;;;;;;;;:::i;:::-;;;;;;;;;;;;-1:-1:-1;;;;;121548:15:0;;121527:18;121548:15;;;:8;:15;;;;;;;;121596:37;;-1:-1:-1;;;121596:37:0;;121627:4;121596:37;;;2461:51:1;121493:19:0;;-1:-1:-1;121548:15:0;;;121527:18;121596:22;;2434:18:1;;121596:37:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;-1:-1:-1;;;;;121664:29:0;;;;;;:22;:29;;;;;;121578:55;;-1:-1:-1;121654:39:0;;121650:204;;;121731:19;121718:9;:32;;;;;;;;:::i;:::-;;121714:125;;121775:44;121785:5;121800;121808:7;121817:1;121775:9;:44::i;:::-;;121714:125;-1:-1:-1;;;121457:3:0;;121424:441;;62790:177;62900:58;;-1:-1:-1;;;;;11376:32:1;;62900:58:0;;;11358:51:1;11425:18;;;11418:34;;;62873:86:0;;62893:5;;-1:-1:-1;;;62923:23:0;11331:18:1;;62900:58:0;;;;-1:-1:-1;;62900:58:0;;;;;;;;;;;;;;-1:-1:-1;;;;;62900:58:0;-1:-1:-1;;;;;;62900:58:0;;;;;;;;;;62873:19;:86::i;102957:1667::-;103115:18;103162:15;;103150:9;:27;103146:1471;;;103210:6;;103194:41;;-1:-1:-1;;;;;103210:6:0;103218:5;103225:9;103194:15;:41::i;:::-;103263:4;;-1:-1:-1;;;;;103254:13:0;;;103263:4;;103254:13;;:28;;-1:-1:-1;103278:4:0;;-1:-1:-1;;;;;103271:11:0;;;103278:4;;103271:11;103254:28;103250:1356;;;103354:482;;;;;;;;-1:-1:-1;;;;;103354:482:0;;;;;;;;;;;;;;;;-1:-1:-1;103522:14:0;;;:7;:14;;;;;;:19;;;;;;;;;;;;;;;103354:482;;;;;;103591:4;103354:482;;;;;;103636:15;103354:482;;;;;;;;;;;;;;;;;;;;;;;;103882:6;;103870:44;;-1:-1:-1;;;103870:44:0;;11750:13:1;;11746:22;;103870:44:0;;;11728:41:1;;;;11811:24;;11807:33;;11785:20;;;11778:63;11883:24;;11879:39;;;11857:20;;;11850:69;11961:24;11957:33;;11935:20;;;11928:63;12029:24;;12007:20;;;12000:54;12092:24;12070:20;;;12063:54;12155:24;12133:20;;;12126:54;12222:24;;12218:33;;12196:20;;;12189:63;103354:482:0;;103882:6;;103870:36;;11662:19:1;;103870:44:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;103857:57;;103284:646;103250:1356;;;-1:-1:-1;;;;;104053:14:0;;;103955:17;104053:14;;;:7;:14;;;;;;;;104068:4;;;;;104053:20;;;;;;;;;104154:13;;;;;;:18;;;;;;;;;;;;103975:269;;-1:-1:-1;;12570:2:1;12566:15;;;12562:24;;103975:269:0;;;12550:37:1;;;;-1:-1:-1;;;;;;12610:3:1;12658:16;;;;;12640:12;;;12633:47;12714:15;;;;;12696:12;;;12689:46;12769:16;;;;;;;12751:12;;;12744:47;12825:15;;;;12821:24;;;12807:12;;;12800:46;103975:269:0;;;;;;;;;104290:6;;104331:240;;;;;12862:12:1;;;104331:240:0;;;104425:4;104331:240;;;;104457:15;104331:240;;;;;;;;;;;;;;;;;104278:312;;-1:-1:-1;;;104278:312:0;;103975:269;;104290:6;;;;;104278:30;;:312;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;104265:325;;103936:670;103250:1356;102957:1667;;;;;;:::o;67136:649::-;67560:23;67586:69;67614:4;67586:69;;;;;;;;;;;;;;;;;67594:5;-1:-1:-1;;;;;67586:27:0;;;:69;;;;;:::i;:::-;67560:95;;67674:10;:17;67695:1;67674:22;:56;;;;67711:10;67700:30;;;;;;;;;;;;:::i;:::-;67666:111;;;;-1:-1:-1;;;67666:111:0;;13994:2:1;67666:111:0;;;13976:21:1;14033:2;14013:18;;;14006:30;14072:34;14052:18;;;14045:62;-1:-1:-1;;;14123:18:1;;;14116:40;14173:19;;67666:111:0;13792:406:1;107531:337:0;107674:49;;-1:-1:-1;;;107674:49:0;;107706:4;107674:49;;;14415:34:1;-1:-1:-1;;;;;14485:15:1;;;14465:18;;;14458:43;107726:7:0;;107674:23;;;;;;14350:18:1;;107674:49:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;:59;107670:191;;;107750:39;-1:-1:-1;;;;;107750:25:0;;107776:9;107787:1;107750:25;:39::i;:::-;107804:45;-1:-1:-1;;;;;107804:25:0;;107830:9;107841:7;107804:25;:45::i;4348:229::-;4485:12;4517:52;4539:6;4547:4;4553:1;4556:12;4517:21;:52::i;63686:582::-;64016:10;;;64015:62;;-1:-1:-1;64032:39:0;;-1:-1:-1;;;64032:39:0;;64056:4;64032:39;;;14415:34:1;-1:-1:-1;;;;;14485:15:1;;;14465:18;;;14458:43;64032:15:0;;;;;14350:18:1;;64032:39:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;:44;64015:62;63993:166;;;;-1:-1:-1;;;63993:166:0;;14714:2:1;63993:166:0;;;14696:21:1;14753:2;14733:18;;;14726:30;14792:34;14772:18;;;14765:62;-1:-1:-1;;;14843:18:1;;;14836:52;14905:19;;63993:166:0;14512:418:1;63993:166:0;64197:62;;-1:-1:-1;;;;;11376:32:1;;64197:62:0;;;11358:51:1;11425:18;;;11418:34;;;64170:90:0;;64190:5;;-1:-1:-1;;;64220:22:0;11331:18:1;;64197:62:0;11184:274:1;5434:455:0;5604:12;5662:5;5637:21;:30;;5629:81;;;;-1:-1:-1;;;5629:81:0;;15137:2:1;5629:81:0;;;15119:21:1;15176:2;15156:18;;;15149:30;15215:34;15195:18;;;15188:62;-1:-1:-1;;;15266:18:1;;;15259:36;15312:19;;5629:81:0;14935:402:1;5629:81:0;5722:12;5736:23;5763:6;-1:-1:-1;;;;;5763:11:0;5782:5;5789:4;5763:31;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;5721:73;;;;5812:69;5839:6;5847:7;5856:10;5868:12;5812:26;:69::i;:::-;5805:76;5434:455;-1:-1:-1;;;;;;;5434:455:0:o;8007:644::-;8192:12;8221:7;8217:427;;;8249:10;:17;8270:1;8249:22;8245:290;;-1:-1:-1;;;;;1888:19:0;;;8459:60;;;;-1:-1:-1;;;8459:60:0;;15836:2:1;8459:60:0;;;15818:21:1;15875:2;15855:18;;;15848:30;15914:31;15894:18;;;15887:59;15963:18;;8459:60:0;15634:353:1;8459:60:0;-1:-1:-1;8556:10:0;8549:17;;8217:427;8599:33;8607:10;8619:12;9354:17;;:21;9350:388;;9586:10;9580:17;9643:15;9630:10;9626:2;9622:19;9615:44;9350:388;9713:12;9706:20;;-1:-1:-1;;;9706:20:0;;;;;;;;:::i;14:131:1:-;-1:-1:-1;;;;;89:31:1;;79:42;;69:70;;135:1;132;125:12;150:247;209:6;262:2;250:9;241:7;237:23;233:32;230:52;;;278:1;275;268:12;230:52;317:9;304:23;336:31;361:5;336:31;:::i;584:658::-;755:2;807:21;;;877:13;;780:18;;;899:22;;;726:4;;755:2;978:15;;;;952:2;937:18;;;726:4;1021:195;1035:6;1032:1;1029:13;1021:195;;;1100:13;;-1:-1:-1;;;;;1096:39:1;1084:52;;1191:15;;;;1156:12;;;;1132:1;1050:9;1021:195;;;-1:-1:-1;1233:3:1;;584:658;-1:-1:-1;;;;;;584:658:1:o;1247:315::-;1315:6;1323;1376:2;1364:9;1355:7;1351:23;1347:32;1344:52;;;1392:1;1389;1382:12;1344:52;1431:9;1418:23;1450:31;1475:5;1450:31;:::i;:::-;1500:5;1552:2;1537:18;;;;1524:32;;-1:-1:-1;;;1247:315:1:o;1567:558::-;1643:6;1651;1659;1712:2;1700:9;1691:7;1687:23;1683:32;1680:52;;;1728:1;1725;1718:12;1680:52;1767:9;1754:23;1786:31;1811:5;1786:31;:::i;:::-;1836:5;-1:-1:-1;1893:2:1;1878:18;;1865:32;1906:33;1865:32;1906:33;:::i;:::-;1958:7;-1:-1:-1;2017:2:1;2002:18;;1989:32;2065:8;2052:22;;2040:35;;2030:63;;2089:1;2086;2079:12;2030:63;2112:7;2102:17;;;1567:558;;;;;:::o;2130:180::-;2189:6;2242:2;2230:9;2221:7;2217:23;2213:32;2210:52;;;2258:1;2255;2248:12;2210:52;-1:-1:-1;2281:23:1;;2130:180;-1:-1:-1;2130:180:1:o;2523:250::-;2608:1;2618:113;2632:6;2629:1;2626:13;2618:113;;;2708:11;;;2702:18;2689:11;;;2682:39;2654:2;2647:10;2618:113;;;-1:-1:-1;;2765:1:1;2747:16;;2740:27;2523:250::o;2778:270::-;2819:3;2857:5;2851:12;2884:6;2879:3;2872:19;2900:76;2969:6;2962:4;2957:3;2953:14;2946:4;2939:5;2935:16;2900:76;:::i;:::-;3030:2;3009:15;-1:-1:-1;;3005:29:1;2996:39;;;;3037:4;2992:50;;2778:270;-1:-1:-1;;2778:270:1:o;3053:298::-;3236:6;3229:14;3222:22;3211:9;3204:41;3281:2;3276;3265:9;3261:18;3254:30;3185:4;3301:44;3341:2;3330:9;3326:18;3318:6;3301:44;:::i;3548:410::-;3629:6;3637;3690:2;3678:9;3669:7;3665:23;3661:32;3658:52;;;3706:1;3703;3696:12;3658:52;3745:9;3732:23;3764:31;3789:5;3764:31;:::i;:::-;3814:5;-1:-1:-1;3871:2:1;3856:18;;3843:32;3906:1;3894:14;;3884:42;;3922:1;3919;3912:12;3884:42;3945:7;3935:17;;;3548:410;;;;;:::o;3963:118::-;4049:5;4042:13;4035:21;4028:5;4025:32;4015:60;;4071:1;4068;4061:12;4086:241;4142:6;4195:2;4183:9;4174:7;4170:23;4166:32;4163:52;;;4211:1;4208;4201:12;4163:52;4250:9;4237:23;4269:28;4291:5;4269:28;:::i;4332:127::-;4393:10;4388:3;4384:20;4381:1;4374:31;4424:4;4421:1;4414:15;4448:4;4445:1;4438:15;4464:341;4609:2;4594:18;;4642:1;4631:13;;4621:144;;4687:10;4682:3;4678:20;4675:1;4668:31;4722:4;4719:1;4712:15;4750:4;4747:1;4740:15;4621:144;4774:25;;;4464:341;:::o;4810:388::-;4878:6;4886;4939:2;4927:9;4918:7;4914:23;4910:32;4907:52;;;4955:1;4952;4945:12;4907:52;4994:9;4981:23;5013:31;5038:5;5013:31;:::i;:::-;5063:5;-1:-1:-1;5120:2:1;5105:18;;5092:32;5133:33;5092:32;5133:33;:::i;5624:127::-;5685:10;5680:3;5676:20;5673:1;5666:31;5716:4;5713:1;5706:15;5740:4;5737:1;5730:15;5756:125;5821:9;;;5842:10;;;5839:36;;;5855:18;;:::i;5886:127::-;5947:10;5942:3;5938:20;5935:1;5928:31;5978:4;5975:1;5968:15;6002:4;5999:1;5992:15;6018:128;6085:9;;;6106:11;;;6103:37;;;6120:18;;:::i;6151:127::-;6212:10;6207:3;6203:20;6200:1;6193:31;6243:4;6240:1;6233:15;6267:4;6264:1;6257:15;6283:184;6353:6;6406:2;6394:9;6385:7;6381:23;6377:32;6374:52;;;6422:1;6419;6412:12;6374:52;-1:-1:-1;6445:16:1;;6283:184;-1:-1:-1;6283:184:1:o;6825:251::-;6895:6;6948:2;6936:9;6927:7;6923:23;6919:32;6916:52;;;6964:1;6961;6954:12;6916:52;6996:9;6990:16;7015:31;7040:5;7015:31;:::i;8812:168::-;8885:9;;;8916;;8933:15;;;8927:22;;8913:37;8903:71;;8954:18;;:::i;8985:217::-;9025:1;9051;9041:132;;9095:10;9090:3;9086:20;9083:1;9076:31;9130:4;9127:1;9120:15;9158:4;9155:1;9148:15;9041:132;-1:-1:-1;9187:9:1;;8985:217::o;12885:652::-;13082:2;13071:9;13064:21;13045:4;13120:6;13114:13;13163:4;13158:2;13147:9;13143:18;13136:32;13191:51;13237:3;13226:9;13222:19;13208:12;13191:51;:::i;:::-;13177:65;;13323:1;13319;13314:3;13310:11;13306:19;13300:2;13292:6;13288:15;13282:22;13278:48;13273:2;13262:9;13258:18;13251:76;13381:2;13373:6;13369:15;13363:22;13358:2;13347:9;13343:18;13336:50;13441:2;13433:6;13429:15;13423:22;13417:3;13406:9;13402:19;13395:51;13502:3;13494:6;13490:16;13484:23;13477:4;13466:9;13462:20;13455:53;13525:6;13517:14;;;12885:652;;;;:::o;13542:245::-;13609:6;13662:2;13650:9;13641:7;13637:23;13633:32;13630:52;;;13678:1;13675;13668:12;13630:52;13710:9;13704:16;13729:28;13751:5;13729:28;:::i;15342:287::-;15471:3;15509:6;15503:13;15525:66;15584:6;15579:3;15572:4;15564:6;15560:17;15525:66;:::i;:::-;15607:16;;;;;15342:287;-1:-1:-1;;15342:287:1:o;15992:219::-;16141:2;16130:9;16123:21;16104:4;16161:44;16201:2;16190:9;16186:18;16178:6;16161:44;:::i

ipfs://b1a4e659c98829db33fc38bb618aeb4d90a36c9fd3f805189999d43aac7b664f