// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0

pragma solidity 0.8.24;

import {EnumerableSet} from "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import {SafeCast} from "@openzeppelin/contracts/utils/math/SafeCast.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {IWithdrawalQueue} from "../interfaces/IWithdrawalQueue.sol";

/// @title WithdrawalQueue
/// @notice Queue for storing and managing withdrawal requests.
///         This contract is based on Lido's WithdrawalQueue
contract WithdrawalQueue is Ownable, IWithdrawalQueue {
    using EnumerableSet for EnumerableSet.UintSet;

    WithdrawalRequest[] private _requests;
    mapping(address => EnumerableSet.UintSet) private _requestsByOwner;
    uint256 private lastRequestId;
    uint256 private lastFinalizedRequestId;

    /// @notice structure representing a request for withdrawal
    struct WithdrawalRequest {
        /// @notice sum of the all shares submitted for withdrawals including this request
        uint256 cumulativeAmount;
        /// @notice address that can claim the request and receives the funds
        address recipient;
        /// @notice block.timestamp when the request was created
        uint40 timestamp;
        /// @notice flag if the request was claimed
        bool claimed;
    }

    /// @notice output format struct for `_getWithdrawalStatus()` method
    struct WithdrawalRequestStatus {
        /// @notice shares amount that was locked on withdrawal queue for this request
        uint256 amount;
        /// @notice address that can claim this request
        address recipient;
        /// @notice timestamp of when the request was created, in seconds
        uint256 timestamp;
        /// @notice true, if request is claimed
        bool isClaimed;
    }

    /// @dev amount represents the nominal amount of tokens that were withdrawn (burned) on L2.
    event WithdrawalRequested(
        uint256 indexed requestId, address indexed requestor, address indexed recipient, uint256 amount
    );

    /// @dev amount represents the real amount of ETH that was transferred to the recipient.
    event WithdrawalClaimed(uint256 indexed requestId, address indexed recipient, uint256 amount);

    /// @dev amountOfETHLocked represents the real amount of ETH that was locked in the queue and will be
    ///      transferred to the recipient on claim.
    event WithdrawalsFinalized(uint256 indexed from, uint256 indexed to, uint256 timestamp);

    error InvalidRequestId(uint256 _requestId);
    error InvalidRequestIdRange(uint256 startId, uint256 endId);
    error RequestNotFoundOrFinalized(uint256 _requestId);
    error RequestAlreadyClaimed(uint256 _requestId);

    constructor(address vault) Ownable(vault) {
        _requests.push(WithdrawalRequest(0, address(0), uint40(block.timestamp), true));
    }

    //slither-disable-next-line naming-convention
    function getWithdrawalStatus(uint256[] calldata _requestIds)
        external
        view
        returns (WithdrawalRequestStatus[] memory statuses)
    {
        statuses = new WithdrawalRequestStatus[](_requestIds.length);
        for (uint256 i = 0; i < _requestIds.length;) {
            statuses[i] = _getStatus(_requestIds[i]);
            unchecked {
                i++;
            }
        }
    }

    //slither-disable-next-line naming-convention
    function getWithdrawalRequests(address _owner) external view virtual returns (uint256[] memory requestIds) {
        return _requestsByOwner[_owner].values();
    }

    /// @notice id of the last request
    ///  NB! requests are indexed from 1, so it returns 0 if there is no requests in the queue
    function getLastRequestId() public view virtual returns (uint256) {
        return lastRequestId;
    }

    /// @notice id of the last finalized request
    ///  NB! requests are indexed from 1, so it returns 0 if there is no finalized requests in the queue
    function getLastFinalizedRequestId() public view virtual returns (uint256) {
        return lastFinalizedRequestId;
    }

    /// @notice return the number of unfinalized requests in the queue
    function unfinalizedRequestNumber() public view virtual returns (uint256) {
        return lastRequestId - lastFinalizedRequestId;
    }

    /// @notice Returns the amount of ETH in the queue yet to be finalized
    ///  NB! this is the nominal amount of ETH burned on L2
    function unfinalizedAmount() external view virtual onlyOwner returns (uint256) {
        return _requests[lastRequestId].cumulativeAmount - _requests[lastFinalizedRequestId].cumulativeAmount;
    }

    /// @dev Returns the status of the withdrawal request with `_requestId` id
    function _getStatus(uint256 _requestId) internal view virtual returns (WithdrawalRequestStatus memory status) {
        if (_requestId == 0 || _requestId > lastRequestId) revert InvalidRequestId(_requestId);

        WithdrawalRequest memory request = _requests[_requestId];
        WithdrawalRequest memory previousRequest = _requests[_requestId - 1];

        status = WithdrawalRequestStatus(
            request.cumulativeAmount - previousRequest.cumulativeAmount,
            request.recipient,
            request.timestamp,
            request.claimed
        );
    }

    /// @dev creates a new `WithdrawalRequest` in the queue
    ///  Emits WithdrawalRequested event
    function requestWithdrawal(address recipient, uint256 amount) external virtual onlyOwner {
        uint256 _lastRequestId = lastRequestId;
        WithdrawalRequest memory lastRequest = _requests[_lastRequestId];

        uint256 cumulativeAmount = lastRequest.cumulativeAmount + amount;
        uint256 requestId = _lastRequestId + 1;
        lastRequestId = requestId;
        WithdrawalRequest memory newRequest =
            WithdrawalRequest(cumulativeAmount, recipient, uint40(block.timestamp), false);
        _requests.push(newRequest);
        assert(_requestsByOwner[recipient].add(requestId));
        emit WithdrawalRequested(requestId, msg.sender, recipient, amount);
    }

    /// @dev preapares a request to be transferred
    ///  Emits WithdrawalClaimed event
    //slither-disable-next-line naming-convention
    function prepareWithdrawal(uint256 _requestId, uint256 _avaliableAssetsInShares)
        external
        onlyOwner
        returns (address recipient, uint256 amount, uint256 avaliableAssetsInShares)
    {
        if (_requestId == 0) revert InvalidRequestId(_requestId);
        if (_requestId < lastFinalizedRequestId) revert RequestNotFoundOrFinalized(_requestId);

        WithdrawalRequest storage request = _requests[_requestId];

        if (request.claimed) revert RequestAlreadyClaimed(_requestId);

        recipient = request.recipient;

        WithdrawalRequest storage prevRequest = _requests[_requestId - 1];

        amount = request.cumulativeAmount - prevRequest.cumulativeAmount;

        if (_avaliableAssetsInShares >= amount) {
            assert(_requestsByOwner[recipient].remove(_requestId));
            avaliableAssetsInShares = _avaliableAssetsInShares - amount;
            request.claimed = true;
            //This is commented to fit the requirements of the vault
            //instead of this we will call _withdrawStrategyFunds
            //IERC20(TOKEN).safeTransfer(recipient, realAmount);

            emit WithdrawalClaimed(_requestId, recipient, amount);
        }
    }

    /// @dev Finalize requests in the queue
    ///  Emits WithdrawalsFinalized event.
    //slither-disable-next-line naming-convention
    function _finalize(uint256 _lastRequestIdToBeFinalized) external onlyOwner {
        if (_lastRequestIdToBeFinalized != 0) {
            if (_lastRequestIdToBeFinalized > lastRequestId) revert InvalidRequestId(_lastRequestIdToBeFinalized);
            uint256 _lastFinalizedRequestId = lastFinalizedRequestId;
            if (_lastRequestIdToBeFinalized <= _lastFinalizedRequestId) {
                revert InvalidRequestId(_lastRequestIdToBeFinalized);
            }

            uint256 firstRequestIdToFinalize = _lastFinalizedRequestId + 1;

            lastFinalizedRequestId = _lastRequestIdToBeFinalized;

            emit WithdrawalsFinalized(firstRequestIdToFinalize, _lastRequestIdToBeFinalized, block.timestamp);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position is the index of the value in the `values` array plus 1.
        // Position 0 is used to mean a value is not in the set.
        mapping(bytes32 value => uint256) _positions;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._positions[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We cache the value's position to prevent multiple reads from the same storage slot
        uint256 position = set._positions[value];

        if (position != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 valueIndex = position - 1;
            uint256 lastIndex = set._values.length - 1;

            if (valueIndex != lastIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the lastValue to the index where the value to delete is
                set._values[valueIndex] = lastValue;
                // Update the tracked position of the lastValue (that was just moved)
                set._positions[lastValue] = position;
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the tracked position for the deleted slot
            delete set._positions[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._positions[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

//SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.24;

interface IWithdrawalQueue {
    function requestWithdrawal(address recipient, uint256 amount) external;
    function prepareWithdrawal(uint256 _requestId, uint256 _avaliableAssets)
        external
        returns (address recipient, uint256 amount, uint256 avaliableAssets);

    function unfinalizedAmount() external view returns (uint256);
    function getLastFinalizedRequestId() external view returns (uint256);
    function getLastRequestId() external view returns (uint256);
    //slither-disable-next-line naming-convention
    function _finalize(uint256 _lastRequestIdToBeFinalized) external;
}

{
  "evmVersion": "cancun",
  "libraries": {},
  "metadata": {
    "appendCBOR": true,
    "bytecodeHash": "ipfs",
    "useLiteralContent": false
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "remappings": [
    "@openzeppelin/contracts/=node_modules/@openzeppelin/contracts/",
    "@openzeppelin/contracts-upgradeable/=node_modules/@openzeppelin/contracts-upgradeable/",
    "@blueprint-finance/=node_modules/@blueprint-finance/",
    "@blueprint-finance/token-distribution-contracts/=node_modules/@blueprint-finance/token-distribution-contracts/",
    "local/src/=src/",
    "@morpho-org/=node_modules/@morpho-org/",
    "@uniswap/=node_modules/@uniswap/",
    "@layerzerolabs/lz-evm-oapp-v2/contracts/=node_modules/@layerzerolabs/lz-evm-oapp-v2/contracts/",
    "@layerzerolabs/lz-evm-messagelib-v2/=node_modules/@layerzerolabs/lz-evm-messagelib-v2/",
    "@layerzerolabs/lz-evm-protocol-v2/=node_modules/@layerzerolabs/lz-evm-protocol-v2/",
    "@layerzerolabs/oapp-evm/contracts/=node_modules/@layerzerolabs/oapp-evm/contracts/",
    "solidity-bytes-utils/=node_modules/solidity-bytes-utils/",
    "base64-sol/=node_modules/base64-sol/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "earn-v1-vault-manager-v1/=node_modules/earn-v1-vault-manager-v1/",
    "@blueprint-finance/multi-asset-vault/=node_modules/@blueprint-finance/multi-asset-vault/",
    "@blueprint-finance/concrete-earn-beacon/=node_modules/@blueprint-finance/concrete-earn-beacon/",
    "beacon-vaults-0.0.2/=node_modules/beacon-vaults-0.0.2/",
    "beacon-vaults-0.0.3/=node_modules/beacon-vaults-0.0.3/",
    "earn-v1-release-0-3-1/=node_modules/earn-v1-release-0-3-1/",
    "earn-v1-release-0-3-12/=node_modules/earn-v1-release-0-3-12/",
    "earn-v1-release-0-4-1/=node_modules/earn-v1-release-0-4-1/",
    "earn-v1-release-0-5-1/=node_modules/earn-v1-release-0-5-1/",
    "@gnosis.pm/safe-contracts/=node_modules/@gnosis.pm/safe-contracts/",
    "eth-gas-reporter/=node_modules/eth-gas-reporter/",
    "forge-std/=lib/forge-std/src/",
    "hardhat/=node_modules/hardhat/",
    "./=remappings.txt/"
  ],
  "viaIR": false
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"vault","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"uint256","name":"_requestId","type":"uint256"}],"name":"InvalidRequestId","type":"error"},{"inputs":[{"internalType":"uint256","name":"startId","type":"uint256"},{"internalType":"uint256","name":"endId","type":"uint256"}],"name":"InvalidRequestIdRange","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"uint256","name":"_requestId","type":"uint256"}],"name":"RequestAlreadyClaimed","type":"error"},{"inputs":[{"internalType":"uint256","name":"_requestId","type":"uint256"}],"name":"RequestNotFoundOrFinalized","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"requestId","type":"uint256"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"WithdrawalClaimed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"requestId","type":"uint256"},{"indexed":true,"internalType":"address","name":"requestor","type":"address"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"WithdrawalRequested","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"from","type":"uint256"},{"indexed":true,"internalType":"uint256","name":"to","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"}],"name":"WithdrawalsFinalized","type":"event"},{"inputs":[{"internalType":"uint256","name":"_lastRequestIdToBeFinalized","type":"uint256"}],"name":"_finalize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getLastFinalizedRequestId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getLastRequestId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"getWithdrawalRequests","outputs":[{"internalType":"uint256[]","name":"requestIds","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"_requestIds","type":"uint256[]"}],"name":"getWithdrawalStatus","outputs":[{"components":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"timestamp","type":"uint256"},{"internalType":"bool","name":"isClaimed","type":"bool"}],"internalType":"struct WithdrawalQueue.WithdrawalRequestStatus[]","name":"statuses","type":"tuple[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_requestId","type":"uint256"},{"internalType":"uint256","name":"_avaliableAssetsInShares","type":"uint256"}],"name":"prepareWithdrawal","outputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"avaliableAssetsInShares","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"requestWithdrawal","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unfinalizedAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"unfinalizedRequestNumber","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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